Fulcrum

What's new:

• Upgraded bundled rocksdb to version 6.6.4 release. This version of rocksdb contains some stability and performance improvements versus the previously bundled version, 6.5.x.
• Updated code to compile without warnings against Qt 5.14.x. Qt 5.14.x has many performance improvements and it is the recommended Qt version for Fulcrum. The pre-built binaries linked below are now statically linked to Qt 5.14.1.
• Added a bitcoind-bound-request-throttling facility. This is controlled via the new configuration parameter bitcoind_throttle which throttles clients that spam requests that hit bitciond. See the description of the parameter here, but the summary is: this facility improves the stability of Fulcrum by not allowing any 1 client to monopolize resources.
• Added two new commands to FulcrumAdmin: bitcoind_throttle and maxbuffer. See ./FulcrumAdmin -h for a description of these commands.
• Bugfixes and stability improvements.

Due to the above improvements it is highly recommended that server admins upgrade to this version at their earliest convenience.

Pre-compiled binaries for Linux

I have provided two pre-built binaries for Linux:

• Fulcrum-1.0.4-x86_64-linux.tar.gz, which is compiled on an Ubuntu 18.10 system.
• Fulcrum-1.0.4-x86_64-linux-ub16.tar.gz, which is compiled on a stock Ubuntu 16.04 system but with g++ 7.3.0 installed from this ppa source: ppa:jonathonf/gcc-7.3 & ppa:jonathonf/gcc

Both of the above binaries contains Qt5Core and Qt5Network from Qt 5.14.1 statically linked. They still requires libz2, libstd++, and the right libc version as dynamic libs on your system (but those are usually present if you are on a recent system).

If the first binary fails, try the second one (-ub16), which should work on older systems, hopefully.

See the .asc files at the bottom for signatures; my gpg public key can be obtained here: https://github.com/Electron-Cash/keys-n-hashes/blob/master/pubkeys/calinkey.txt

Binary builds for macOS and Windows coming soon -- Until then you can always build from source!

What's new:

• Fixed a bug where RPC listunspent would not always take the mempool into account correctly.
  • Oops! This slipped through the cracks because Electron Cash doesn't even use this method. The impact of this bug is minor since this method is only used in plugins like CashFusion, and even then only when blaming due to a bad Fusion (which is a rare event).
  • Special thanks to Harry Barber @hlb8122 for catching this!

Pre-compiled binaries for Linux

I have provided two pre-built binaries for Linux:

• Fulcrum-1.0.3-x86_64-linux.tar.gz, which is compiled on an Ubuntu 18.10 system.
• Fulcrum-1.0.3-x86_64-linux-ub16.tar.gz, which is compiled on a stock Ubuntu 16.04 system but with g++ 7.3.0 installed from this ppa source: ppa:jonathonf/gcc-7.3 & ppa:jonathonf/gcc

Both of the above binaries contains Qt5Core and Qt5Network statically linked. They still requires libz2, libstd++, and the right libc version as dynamic libs on your system (but those are usually present if you are on a recent system).

If the first binary fails, try the second one (-ub16), which should work on older systems, hopefully.

See the .asc files at the bottom for signatures; my gpg public key can be obtained here: https://github.com/Electron-Cash/keys-n-hashes/blob/master/pubkeys/calinkey.txt

Binary builds for macOS and Windows coming soon -- Until then you can always build from source!

What's new:

• Minor bugfix release to address an issue with Electron Cash clients not tolerating error messages on idle discconect. See: https://github.com/Electron-Cash/Electron-Cash/issues/1774

Pre-compiled binaries for Linux

I have provided two pre-built binaries for Linux:

• Fulcrum-1.0.2-x86_64-linux.tar.gz, which is compiled on an Ubuntu 18.10 system.
• Fulcrum-1.0.2-x86_64-linux-ub16.tar.gz, which is compiled on a stock Ubuntu 16.04 system but with g++ 7.3.0 installed from this ppa source: ppa:jonathonf/gcc-7.3 & ppa:jonathonf/gcc

Both of the above binaries contains Qt5Core and Qt5Network statically linked. They still requires libz2, libstd++, and the right libc version as dynamic libs on your system (but those are usually present if you are on a recent system).

If the first binary fails, try the second one (-ub16), which should work on older systems, hopefully.

See the .asc files at the bottom for signatures; my gpg public key can be obtained here: https://github.com/Electron-Cash/keys-n-hashes/blob/master/pubkeys/calinkey.txt

Binary builds for macOS and Windows coming soon -- Until then you can always build from source!

This is the first update of Fulcrum.

What's new:

• Tor / .onion support. Now Fulcrum is feature-complete. It can peer with .onion peers and also announce itself as a hidden service if so-configured. You need a Tor proxy for the .onion peering to work. See the new config file options: tor_hostname, tor_tcp_port, tor_ssl_port, tor_banner, & tor_proxy.
• Bugfix -- It was possible for disconnected clients to remain as "zombies" for a time after disconnection. This has been addressed.
• Fulcrum now has a man page! Special thanks to @hegjon for creating it and adding it to the .rpm spec file.
• Added better formatting to the FulcrumAdmin script for the various "elapsed time" columns. Now it no longer shows you raw time in seconds, but rather a human friendly time in minutes, hours, days, etc.
• Changed the synch. progress display to show txs/sec rather than ins & outs/sec.
• Various internal nits and refactorings, plus some typos fixed in some esoteric error & debug messages.

Pre-compiled binaries for Linux

I have provided two pre-built binaries for Linux:

• Fulcrum-1.0.1-x86_64-linux.tar.gz, which is compiled on an Ubuntu 18.10 system.
• Fulcrum-1.0.1-x86_64-linux-ub16.tar.gz, which is compiled on a stock Ubuntu 16.04 system but with g++ 7.3.0 installed from this ppa source: ppa:jonathonf/gcc-7.3 & ppa:jonathonf/gcc

Both of the above binaries contains Qt5Core and Qt5Network statically linked. They still requires libz2, libstd++, and the right libc version as dynamic libs on your system (but those are usually present if you are on a recent system).

If the first binary fails, try the second one (-ub16), which should work on older systems, hopefully.

See the .asc files at the bottom for signatures; my gpg public key can be obtained here: https://github.com/Electron-Cash/keys-n-hashes/blob/master/pubkeys/calinkey.txt

Binary builds for macOS and Windows coming soon -- Until then you can always build from source!

This is the first release of Fulcrum. It has been tested for a few weeks now by myself and a couple of other server admins and we are confident it is at a point where it can be used in production.

It is 100% protocol-level compatible with existing Electron Cash clients and behaves identically to existing Electrum servers (ElectronX and ElectrumX) from a client's perspective. It is very fast and we hope administering Fulcrum will be a familiar experience for server admins.

Tell your friends!

Pre-compiled binaries for Linux

I have provided two pre-built binaries for Linux:

• Fulcrum-1.0-x86_64-linux.tar.gz, which is compiled on an Ubuntu 18.10 system.
• Fulcrum-1.0-x86_64-linux-ub16.tar.gz, which is compiled on a stock Ubuntu 16.04 system but with g++ 7.3.0 installed from this ppa source: ppa:jonathonf/gcc-7.3 & ppa:jonathonf/gcc

Both of the above binaries contains Qt5Core and Qt5Network statically linked. They still requires libz2, libstd++, and the right libc version as dynamic libs on your system (but those are usually present if you are on a recent system).

If the first binary fails, try the second one (-ub16), which should work on older systems, hopefully.

See the .asc files at the bottom for signatures; my gpg public key can be obtained here: https://github.com/Electron-Cash/keys-n-hashes/blob/master/pubkeys/calinkey.txt

Binary builds for macOS and Windows coming soon -- Until then you can always build from source!