The official Asterisk Project repository.
OTHER License
Bot releases are visible (Hide)
Published by asterisk-org-access-app[bot] over 1 year ago
The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
https://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-20.3.0.md
Published by gtjoseph over 1 year ago
The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
https://downloads.asterisk.org/pub/telephony/asterisk/releases/ChangeLog-18.18.0.md
Published by asterisk-org-access-app[bot] over 1 year ago
The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
https://github.com/asterisk/asterisk/releases/download/20.3.0-rc1/ChangeLog-20.3.0-rc1.md
Published by asterisk-org-access-app[bot] over 1 year ago
The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
The res_http_media_cache module now attempts to load
configuration from the res_http_media_cache.conf file.
The following options were added:
Add optional touch variable : TOUCH_MIXMONITOR_BEEP(interval)
Setting TOUCH_MIXMONITOR_BEEP/TOUCH_MONITOR_BEEP to a valid
interval in seconds will result in a periodic beep being
played to the monitored channel upon MixMontior/Monitor
feature start.
If an interval less than 5 seconds is specified, the interval
will default to 5 seconds. If the value is set to an invalid
interval, the default of 15 seconds will be used.
DUNDi now supports chan_pjsip. Outgoing calls using
PJSIP require the pjsip_outgoing_endpoint option
to be set in dundi.conf.
format_sln now recognizes '.slin' as a valid
file extension in addition to the existing
'.sln' and '.raw'.
This change increases the display width on 'core show channels'
amd 'core show channels verbose'
For 'core show channels', the Channel name field is increased to
64 characters and the Location name field is increased to 32
characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
The SendFlash AMI action now allows sending
a hook flash event on a channel.
The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
The "failures" attribute was added to the "testsuite"
element.
Also added two new unit tests that just pass and fail
to be used for testing CI itself.
It is now possible to specify the MixMonitorID when calling
the manager action: MixMonitorMute. This will allow an
individual MixMonitor instance to be muted via ID.
The MixMonitorID can be stored as a channel variable using
the 'i' MixMonitor option and is returned upon creation if
this option is used.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor audiohooks on the channel. Previous
behavior would set the flag on the first MixMonitor audiohook
found.
https://github.com/asterisk/asterisk/releases/download/18.18.0-rc1/ChangeLog-18.18.0-rc1.md