simh

Notes For V3.9

The makefile now works for all *nix platforms and with cygwin and MinGW32
on Windows. It will automatically detect the availability of libpcap
components and build network capable simulators if they are available.

1. New Features

1.1 3.9-0

1.1.1 SCP and libraries

    - added *nix READLINE support (Mark Pizzolato)
    - added "SHOW SHOW" and "SHOW <dev> SHOW" commands (Mark Pizzolato)
    - added support for BREAK key on Windows (Mark Pizzolato)
    - added ethernet support (Mark Pizzolato)
         windows host <-> simulator NIC sharing
         native tap interfaces on BSD, Linux and OSX
         vde (Virtual Distributed Ethernet) networking
         Large Send Offload support
         UDP and TCP Checksum offload support
         dynamic libpcap loading on *nix platforms

1.1.2 PDP-8

    - floating point processor is now enabled

1.1.3 HP2100 (Dave Bryan)

    - added support for 12821A HP-IB disk controller,
      7906H/20H/25H disks

1.1.4 PDP11 and VAX (Mark Pizzolato)

    - added DELQA-Plus device

1.1.5 IA64 VMS Ethernet Support

    - identified compiler version issues and added IA64 support (Matt Burke)

1. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

1. Status Report

This is the last release of SimH for which I will be lead editor. After this
release, the source is moving to a public repository:

    https://github.com/simh/simh

under the general editorship of Dave Hittner and Mark Pizzolato. The status
of the individual simulators is as follows:

3.1 PDP-1

Stable and working; runs available software.

3.2 PDP-4/7/9/15

Stable and working; runs available software.

3.3 PDP-8

Stable and working; runs available software.

3.4 PDP-10 [KS-10 only]

Stable and working; runs available software.

3.5 PDP-11

Stable and working; runs available system software. The emulation of individual
models has numerous errors of detail, which prevents many diagnostics from
running correctly.

3.6 VAX-11/780

Stable and working; runs available software.

3.7 MicroVAX 3900 (VAX)

Stable and working; runs available software. Thanks to the kind generosity of
Camiel Vanderhoeven, this simulator has been verified with AXE, the VAX
architectural exerciser.

3.8 Nova

Stable and working; runs available software.

3.9 Eclipse

Stable and working, but not really supported. There is no Eclipse-specific
software available under a hobbyist license.

3.10 Interdata 16b

Stable and working, but no software for it has been found, other than
diagnostics.

3.11 Interdata 32b

Stable and working; runs 32b UNIX and diagnostics.

3.12 IBM 1401

Stable and working; runs available software.

3.13 IBM 1620

Hand debug only. No software for it has been found or tested.

3.14 IBM 7094

Stable and working as a stock system; runs IBSYS. The CTSS extensions
have not been debugged.

3.15 IBM S/3

Stable and working, but not really supported. Runs available software.

3.16 IBM 1130

Stable and working; runs available software. Supported and edited by
Brian Knittel.

3.17 HP 2100/1000

Stable and working; runs available software. Supported and edited by
Dave Bryan.

3.18 Honeywell 316/516

Stable and working; runs available software.

3.19 GRI-909/99

Hand debug only. No software for it has been found or tested.

3.20 SDS-940

Hand debug only, and a few diagnostics.

3.21 LGP-30

Unfinished; hand debug only. Does not run available software, probably
due to my misunderstanding of the LGP-30 operational procedures.

3.22 Altair (original 8080 version)

Stable and working, but not really supported. Runs available software.

3.23 AltairZ80 (Z80 version)

Stable and working; runs available software. Supported and edited by
Peter Schorn.

3.24 SWTP 6800

Stable and working; runs available software. Supported and edited by
Bill Beech

3.25 Sigma 32b

Incomplete; more work is needed on the peripherals for accuracy.
Included in the beta simulators package.

3.26 Alpha

Incomplete; essentially just an EV-5 (21164) chip emulator. Included
in the beta simulators package.

3.27 SAGE

Incomplete. Included in the beta simulators package.

3.28 SC1

Internal simulator for SiCortex supercomputer; intended as an example
of implementing an SMP system in the current SimH structure. Included
in the beta simulators package.

1. Suggestions for Future Work

4.1 General Structure

    - Multi-threading, to allow true concurrency between SCP and the simulator
    - Graphics device support, particularly for the PDP-1 and PDP-11

4.2 Current Simulators

    - PDP-1 graphics, to run Space War
    - PDP-11 GT40 graphics, to run Lunar Lander
    - PDP-15 MUMPS-15
    - Interdata native OS debug, both 16b and 32b
    - SDS 940 timesharing operating system debug
    - IBM 7094 CTSS feature debug and operating system debug
    - IBM 1620 debug and software
    - GRI-909 software
    - Sigma 32b completion and debug
    - LGP-30 debug

4.3 Possible Future Simulators

    - Data General MV8000 (if a hobbyist license can be obtained for AOS)
    - Alpha simulator
    - HP 3000 (16b) simulator with MPE

This is a pre-release of v3.9-0

Pre-release of v3.9-0

Author: Bob Supnik [email protected]
Date: Sun Feb 8 09:06:00 2009 -0800

Notes For V3.8

The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:

> export OSTYPE
> make

Otherwise, you will get build errors.

1. New Features

1.1 3.8-0

1.1.1 SCP and Libraries

- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
  show (respectively) a breakpoint at the current PC.

1.1.2 GRI

- Added support for the GRI-99 processor.

1.1.3 HP2100

- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.

1.1.4 Nova

- Added support for 64KW memory (implemented in third-party CPU's).

1.1.5 PDP-11

- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.

1.2 3.8-1

1.2.1 SCP and libraries

- Added capability to set line connection order for terminal multiplexers.

1.2.2 HP2100

- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Tue Jun 24 14:21:00 2008 -0700

Notes For V3.8

The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:

> export OSTYPE
> make

Otherwise, you will get build errors.

1. New Features

1.1 3.8-0

1.1.1 SCP and Libraries

- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
  show (respectively) a breakpoint at the current PC.

1.2 GRI

- Added support for the GRI-99 processor.

1.3 HP2100

- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.

1.4 Nova

- Added support for 64KW memory (implemented in third-party CPU's).

1.5 PDP-11

- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Sun Sep 2 05:30:00 2007 -0700

Notes For V3.7

1. New Features

1.1 3.7-0

1.1.1 SCP

- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
  execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
  Dave Bryan).

1.1.2 HP2100

- Added Double Integer instructions, 1000-F CPU, and Floating Point
  Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
  21xx binary loader protection (from Dave Bryan).

1.1.3 Interdata

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state.

1.1.4 PDP-11

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (WAIT instruction executed).
- Added TA11/TU60 cassette support.

1.1.5 PDP-8

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.

1.1.6 PDP-1

- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.

1.1.6 PDP-4/7/9/15

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).

1.1.7 VAX, VAX780

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).

1.1.8 PDP-10

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (operating system dependent).
- Added CD20 (CD11) support.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Thu Jul 12 19:12:00 2007 -0700

Notes For V3.7

1. New Features

1.1 3.7-0

1.1.1 SCP

- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
  execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
  Dave Bryan).

1.1.2 HP2100

- Added Double Integer instructions, 1000-F CPU, and Floating Point
  Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
  21xx binary loader protection (from Dave Bryan).

1.1.3 Interdata

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state.

1.1.4 PDP-11

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (WAIT instruction executed).
- Added TA11/TU60 cassette support.

1.1.5 PDP-8

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.

1.1.6 PDP-1

- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.

1.1.6 PDP-4/7/9/15

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).

1.1.7 VAX, VAX780

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).

1.1.8 PDP-10

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (operating system dependent).
- Added CD20 (CD11) support.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Sat May 12 17:39:00 2007 -0700

Notes For V3.7

1. New Features

1.1 3.7-0

1.1.1 SCP

- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
  execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
  Dave Bryan).

1.1.2 HP2100

- Added Double Integer instructions, 1000-F CPU, and Floating Point
  Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
  21xx binary loader protection (from Dave Bryan).

1.1.3 Interdata

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state.

1.1.4 PDP-11

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (WAIT instruction executed).
- Added TA11/TU60 cassette support.

1.1.5 PDP-8

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.

1.1.6 PDP-1

- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.

1.1.6 PDP-4/7/9/15

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).

1.1.7 VAX, VAX780

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).

1.1.8 PDP-10

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (operating system dependent).
- Added CD20 (CD11) support.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Sat Feb 3 14:59:00 2007 -0800

Notes For V3.7-0

1. New Features

1.1 3.7-0

1.1.1 SCP

- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
  execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
  Dave Bryan).

1.1.2 HP2100

- Added Double Integer instructions, 1000-F CPU, and Floating Point
  Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
  21xx binary loader protection (from Dave Bryan).

1.1.3 Interdata

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state.

1.1.4 PDP-11

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (WAIT instruction executed).
- Added TA11/TU60 cassette support.

1.1.5 PDP-8

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.

1.1.6 PDP-1

- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.

1.1.6 PDP-4/7/9/15

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (keyboard poll loop or jump-to-self).

1.1.7 VAX, VAX780

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).

1.1.8 PDP-10

- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
  state (operating system dependent).
- Added CD20 (CD11) support.

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Thu Jul 20 13:36:00 2006 -0700

Notes For V3.6-0

The save/restore format has been updated to improve its reliability.
As a result, save files prior to release 3.0 are no longer supported.

The text documentation files are obsolete and are no longer included
with the distribution.  Up-to-date PDF documentation files are
available on the SimH web site.

1. New Features

1.1 3.6-0

1.1.1 Most magnetic tapes

- Added support for limiting tape capacity to a particular size in MB

1.1.2 IBM 7090/7094

- First release

1.1.3 VAX-11/780

- Added FLOAD command, loads system file from console floppy disk

1.1.4 VAX, VAX-11/780, and PDP-11

- Added card reader support (from John Dundas)

1.1.5 PDP-11

- Added instruction history

1.2 3.6-1

1.2.1 PDP-11

- Added RF11 support
- Added multiple KL11/DL11 support
- Added upper-case only mode to TTI, TTO

1.2.2

- Added binary loader (courtesy of Dave Pitt)

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Sat May 27 11:34:00 2006 -0700

Notes For V3.6-0

The save/restore format has been updated to improve its reliability.
As a result, save files prior to release 3.0 are no longer supported.

The text documentation files are obsolete and are no longer included
with the distribution.  Up-to-date PDF documentation files are
available on the SimH web site.

1. New Features

1.1 3.6-0

1.1.1 Most magnetic tapes

- Added support for limiting tape capacity to a particular size in MB

1.1.2 IBM 7090/7094

- First release

1.1.3 VAX-11/780

- Added FLOAD command, loads system file from console floppy disk

1.1.4 VAX, VAX-11/780, and PDP-11

- Added card reader support (from John Dundas)

1.1.5 PDP-11

- Added instruction history

2. Bugs Fixed

Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.

Author: Bob Supnik [email protected]
Date: Mon Jan 23 20:01:00 2006 -0800

Notes For V3.5-1

The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features

1.1 3.5-0

1.1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.1.4 PDP-11

- Revised autoconfigure to handle more cases

1.2 3.5-1

No new features

1.3 3.5-2

1.3.1 All ASCII terminals

- Most ASCII terminal emulators have supported 7-bit and 8-bit
  operation; where required, they have also supported an upper-
  case only or KSR-emulation mode.  This release adds a new mode,
  7P, for 7-bit printing characters.  In 7P mode, non-printing
  characters in the range 0-31 (decimal), and 127 (decimal), are
  automatically suppressed.  This prevents printing of fill
  characters under Windows.

  The printable character set for ASCII code values 0-31 can be
  changed with the SET CONSOLE PCHAR command.  Code value 127
  (DELETE) is always suppressed.

1.3.2 VAX-11/780

- First release.  The VAX-11/780 has successfully run VMS V7.2.  The
  commercial instructions and compatability mode have not been
  extensively tested.  The Ethernet controller is not working yet
  and is disabled.

2. Bugs Fixed

2.1 3.5-0

2.1.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.1.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.1.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.1.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.1.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.1.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.1.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

2.2 3.5-1

2.2.1 1401

- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings

2.2.2 1620

- Changed character encodings to be compatible with Pierce 709X simulator

2.2.3 PDP-10

- Changed MOVNI to eliminate GCC warning

2.2.4 VAX

- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table

2.2.5 PDP-11

- Fixed bug in autoconfiguration table

2.3 3.5-2

2.3.1 PDP-10

- RP: fixed drive clear not to clear disk address

2.3.2 PDP-11 (VAX, VAX-11/780, for shared peripherals)

- HK: fixed overlap seek interaction with drive select, drive clear, etc
- RQ, TM, TQ, TS, TU: widened address display to 64b when USE_ADDR64 option selected
- TU: changed default adapter from TM02 to TM03 (required by VMS)
- RP: fixed drive clear not to clear disk address
- RP, TU: fixed device enable/disable to enabled/disable Massbus adapter as well
- XQ: fixed register access alignment bug (found by Doug Carman)

2.3.3 PDP-8

- RL: fixed IOT 61 decoding bug (found by David Gesswein)
- DF, DT, RF: fixed register access alignment bug (found by Doug Carman)

2.3.4 VAX

- Fixed CVTfi to trap on integer overflow if PSW<iv> is set
- Fixed breakpoint detection when USE_ADDR64 option selected

Author: Bob Supnik [email protected]
Date: Sat Oct 15 15:38:00 2005 -0700

Notes For V3.5-1

The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features

1.1 3.5-0

1.1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.1.4 PDP-11

- Revised autoconfigure to handle more casees

2. Bugs Fixed

2.1 3.5-0

2.1.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.1.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.1.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.1.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.1.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.1.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.1.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.1.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

2.2 3.5-1

2.2.1 1401

- Changed character encodings to be compatible with Pierce 709X simulator
- Added mode for old/new character encodings

2.2.2 1620

- Changed character encodings to be compatible with Pierce 709X simulator

2.2.3 PDP-10

- Changed MOVNI to eliminate GCC warning

2.2.4 VAX

- Fixed bug in structure definitions with 32b compilation options
- Fixed bug in autoconfiguration table

2.2.5 PDP-11

- Fixed bug in autoconfiguration table

Author: Bob Supnik [email protected]
Date: Fri Sep 9 18:09:00 2005 -0700

Notes For V3.5-0

The source set has been extensively overhauled.  For correct
viewing, set Visual C++ or Emacs to have tab stops every 4
characters.

1. New Features in 3.4-1

1.1 All Ethernet devices

- Added Windows user-defined adapter names (from Timothe Litt)

1.2 Interdata, SDS, HP, PDP-8, PDP-18b terminal multiplexors

- Added support for SET <unit>n DISCONNECT

1.3 VAX

- Added latent QDSS support
- Revised autoconfigure to handle QDSS

1.4 PDP-11

- Revised autoconfigure to handle more casees

2. Bugs Fixed in 3.4-1

2.1 SCP and libraries

- Trim trailing spaces on all input (for example, attach file names)
- Fixed sim_sock spurious SIGPIPE error in Unix/Linux
- Fixed sim_tape misallocation of TPC map array for 64b simulators

2.2 1401

- Fixed bug, CPU reset was clearing SSB through SSG

2.3 PDP-11

- Fixed bug in VH vector display routine
- Fixed XU runt packet processing (found by Tim Chapman)

2.4 Interdata

- Fixed bug in SHOW PAS CONN/STATS
- Fixed potential integer overflow exception in divide

2.5 SDS

- Fixed bug in SHOW MUX CONN/STATS

2.6 HP

- Fixed bug in SHOW MUX CONN/STATS

2.7 PDP-8

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.8 PDP-18b

- Fixed bug in SHOW TTIX CONN/STATS
- Fixed bug in SET/SHOW TTOXn LOG

2.9 Nova, Eclipse

- Fixed potential integer overflow exception in divide

Author: Bob Supnik [email protected]
Date: Tue May 3 04:10:00 2005 -0700

Notes For V3.4-0

The memory layout for the Interdata simulators has been changed.
Do not use Interdata SAVE files from prior revisions with V3.4.

1. New Features in 3.4

1.1 SCP and Libraries

- Revised interpretation of fprint_sym, fparse_sym returns
- Revised syntax for SET DEBUG
- DO command nesting allowed to ten levels

1.2 Interdata

- Revised memory model to be 16b instead of 8b

1.3 HP2100

- Added Fast FORTRAN Processor instructions
- Added SET OFFLINE/ONLINE and SET UNLOAD/LOAD commands to tapes and disks

2. Bugs Fixed in 3.4-0

2.1 Interdata

- Fixed bug in show history routine (from Mark Hittinger)
- Fixed bug in initial memory allocation

2.2 PDP-10

- Fixed TU bug, ERASE and WREOF should not clear done (reported by
  Rich Alderson)
- Fixed TU error reporting

2.3 PDP-11

- Fixed TU error reporting

Author: Bob Supnik [email protected]
Date: Wed Mar 9 19:33:00 2005 -0800

Notes For V3.3-2

1. New Features in 3.3-2

1.1 SCP and Libraries

- Added ASSERT command (from Dave Bryan)

1.2 PDP-11, VAX

- Added RA60, RA71, RA81 disks

2. Bugs Fixed in 3.3-2

2.1 H316

- Fixed IORETURN macro
- PT: fixed bug in OCP '0001 (found by Philipp Hachtmann)
- MT: fixed error reporting from OCP (found by Philipp Hachtmann)

2.2 Interdata 32b

- Fixed branches to mask new PC (from Greg Johnson)

2.3 PDP-11

- Fixed bugs in RESET for 11/70 (reported by Tim Chapman)
- Fixed bug in SHOW MODEL (from Sergey Okhapkin)
- Made SYSID variable for 11/70 (from Tim Chapman)
- Fixed MBRK write case for 11/70 (from Tim Chapman)
- RY: fixed bug in boot code (reported by Graham Toal)

2.4 VAX

- Fixed initial state of cpu_extmem

2.5 HP2100 (from Dave Bryan)

- Fixed missing MPCK on JRS target
- Removed EXECUTE instruction (is NOP in actual microcode)
- Fixed missing negative overflow renorm in StoreFP

2.6 I1401

- Fixed bug in line printer write line (reported by Van Snyder)

Author: Bob Supnik [email protected]
Date: Sun Jan 9 13:55:00 2005 -0800

Notes For V3.3-1

1. New Features in 3.3-1

1.1 H316

TTY - implemented paper-tape reader and punch
    - added ASCII file support

PTR,PTP     - added ASCII file support

1.2 HP2100

CPU - added SET CPU 21MX-M, 21MX-E (from Dave Brian)
    - disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (from Dave Bryan)
    - added post-processor to maintain T/M consistency (from Dave Bryan)

DS  - released 13037 disk controller

1.3 Interdata

MT  - added read-only file support

1.4 SDS

MT  - added read-only file support

1.5 PDP-11

TM,TS       - added read-only file support

2. Bugs Fixed in 3.3

2.1 H316

CPU - fixed bug in divide

LPT - fixed bug in DMA/DMC support

MT  - fixed bug in DMA/DMC support

DP  - fixed bug in skip on not seeking

TTY - fixed bugs in SKS '104, '504

2.2 HP2100

CPU - fixed DMA reset to clear alternate CTL flop (from Dave Bryan)
    - fixed bug in JPY (from Dave Bryan)
    - fixed bugs in CBS, SBS, TBS
    - separate A/B from M[0/1] for DMA (found by Dave Bryan)

LPS - added restart when set online, etc. (from Dave Bryan)
    - fixed col count for non-printing chars (from Dave Bryan)

LPT - added restart when set online, etc. (from Dave Bryan)

2.3 PDP-11

CPU - fixed WAIT to work in all modes (from John Dundas)

Author: Bob Supnik [email protected]
Date: Tue Nov 23 15:49:00 2004 -0800

Notes For V3.3

RESTRICTION: The HP DS disk is not debugged.  DO NOT enable this
feature for normal operations.
WARNING: Massive changes in the PDP-11 make all previous SAVEd
file obsolete.  Do not attempt to use a PDP-11 SAVE file from a
prior release with V3.3!

1. New Features in 3.3

1.1 SCP

- Added -p (powerup) qualifier to RESET
- Changed SET <unit> ONLINE/OFFLINE to SET <unit> ENABLED/DISABLED
- Moved SET DEBUG under SET CONSOLE hierarchy
- Added optional parameter value to SHOW command
- Added output file option to SHOW command

1.2 PDP-11

- Separated RH Massbus adapter from RP controller
- Added TU tape support
- Added model emulation framework
- Added model details

1.3 VAX

- Separated out CVAX-specific features from core instruction simulator
- Implemented capability for CIS, octaword, compatibility mode instructions
- Added instruction display and parse for compatibility mode
- Changed SET CPU VIRTUAL=n to SHOW CPU VIRTUAL=n
- Added =n optional parameter to SHOW CPU HISTORY

1.4 Unibus/Qbus simulators (PDP-11, VAX, PDP-10)

- Simplified DMA API's
- Modified DMA peripherals to use simplified API's

1.5 HP2100 (all changes from Dave Bryan)

CPU - moved MP into its own device; added MP option jumpers
    - modified DMA to allow disabling
    - modified SET CPU 2100/2116 to truncate memory > 32K
    - added -F switch to SET CPU to force memory truncation
    - modified WRU to be REG_HRO
    - added BRK and DEL to save console settings

DR  - provided protected tracks and "Writing Enabled" status bit
    - added "parity error" status return on writes for 12606
    - added track origin test for 12606
    - added SCP test for 12606
    - added "Sector Flag" status bit
    - added "Read Inhibit" status bit for 12606
    - added TRACKPROT modifier

LPS - added SET OFFLINE/ONLINE, POWEROFF/POWERON
    - added fast/realistic timing
    - added debug printouts

LPT - added SET OFFLINE/ONLINE, POWEROFF/POWERON

PTR - added paper tape loop mode, DIAG/READER modifiers to PTR
    - added PV_LEFT to PTR TRLLIM register

CLK - modified CLK to permit disable

1.6 IBM 1401, IBM 1620, Interdata 16b, SDS 940, PDP-10

- Added instruction history

1.7 H316, PDP-15, PDP-8

- Added =n optional value to SHOW CPU HISTORY

2. Bugs Fixed in 3.3

2.1 SCP

- Fixed comma-separated SET options (from Dave Bryan)
- Fixed duplicate HELP displays with user-specified commands

2.2 PDP-10

- Replicated RP register state per drive
- Fixed TU to set FCE on short record
- Fixed TU to return bit<15> in drive type
- Fixed TU format specification, 1:0 are don't cares
- Fixed TU handling of TMK status
- Fixed TU handling of DONE, ATA at end of operation
- Implemented TU write check

2.3 PDP-11

- Replicated RP register state per drive
- Fixed RQ, TQ to report correct controller type and stage 1 configuration
  flags on a Unibus system
- Fixed HK CS2<output_ready> flag

2.4 VAX

- Fixed parsing of indirect displacement modes in instruction input

2.5 HP2100 (all fixes from Dave Bryan)

CPU - fixed S-register behavior on 2116
    - fixed LIx/MIx behavior for DMA on 2116 and 2100
    - fixed LIx/MIx behavior for empty I/O card slots

DP  - fixed enable/disable from either device
    - fixed ANY ERROR status for 12557A interface
    - fixed unattached drive status for 12557A interface
    - status cmd without prior STC DC now completes (12557A)
    - OTA/OTB CC on 13210A interface also does CLC CC
    - fixed RAR model
    - fixed seek check on 13210 if sector out of range

DQ  - fixed enable/disable from either device
    - shortened xtime from 5 to 3 (drive avg 156KW/second)
    - fixed not ready/any error status
    - fixed RAR model

DR  - fixed enable/disable from either device
    - fixed sector return in status word
    - fixed DMA last word write, incomplete sector fill value
    - fixed 12610 SFC operation
    - fixed current-sector determination

IPL - fixed enable/disable from either device

LPS - fixed status returns for error conditions
    - fixed handling of non-printing characters
    - fixed handling of characters after column 80
    - improved timing model accuracy for RTE

LPT - fixed status returns for error conditions
    - fixed TOF handling so form remains on line 0

SYS - fixed display of CCA/CCB/CCE instructions

2.5 PDP-15

FPP - fixed URFST to mask low 9b of fraction
    - fixed exception PC setting

Author: Bob Supnik [email protected]
Date: Fri Sep 3 15:31:00 2004 -0700

Notes For V3.2-3

RESTRICTION: The PDP-15 FPP is only partially debugged.  Do NOT
enable this feature for normal operations.
RESTRICTION: The HP DS disk is not debugged.  DO NOT enable this
feature for normal operations.

1. New Features in 3.2-3

1.1 SCP

- Added ECHO command (from Dave Bryan)

2. Bugs Fixed in 3.2-2

2.1 SCP

- Qualified RESTORE detach with SIM_SW_REST
- Fixed OS/2 issues in sim_console.c and sim_sock.h

2.2 HP2100 (all from Dave Bryan)

- Changed CPU error stops to report PC not PC + 1

- Fixed CLC to DR to stop operation in progress

- Functional and timing fixes to DP
  > controller sets ATN for all commands except read status
  > controller resumes polling for ATN interrupts after read status
  > check status on unattached drive set busy and not ready
  > check status tests wrong unit for write protect status
  > drive on line sets ATN, will set FLG if polling

- Functional and timing fixes to MS
  > fixed erroneous execution of rejected command
  > fixed erroneous execution of select-only command
  > fixed erroneous execution of clear command
  > fixed odd byte handling for read
  > fixed spurious odd byte status on 13183A EOF
  > modified handling of end of medium
  > added detailed timing, with fast and realistic modes
  > added reel sizes to simulate end of tape
  > added debug printouts

- Modified MT handling of end of medium

- Added tab to TTY control char set

2.3 VAX

- VAX RQ controllers start LUNs at 0 (from Andreas Cejna)
- Added compatibility mode definitions
- Fixed EMODD, EMODG to probe second longword of quadword destination