Bot releases are visible (Hide)
1.7.0 is Atmosphère's seventy-eighth official release.
Please be sure to update fusee when upgrading to 1.7.0. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.7.0 is bundled with hbl 2.4.4, and hbmenu 3.6.0.
The following was changed since the last release:
exosphère
was updated to reflect the latest official secure monitor behavior.mesosphère
was updated to reflect the latest official kernel behavior.spl
was updated to reflect the latest official behavior.fusee
no longer supports applying IPS patches to KIPs.
fusee
seeks to be a minimal bootloader.pt-BR
(PortugueseBr
) is now accepted as a valid language when overriding game locales.pm
's resource limit boost logic that could potentially cause legitimate boosts to fail in certain circumstances.loader
/ro
will now throw a fatal error when using invalid IPS patches that go out of bounds, instead of corrupting memory.For information on the featureset supported by 1.7, please see the official release notes.
Published by SciresM 12 months ago
1.6.2 is Atmosphère's seventy-seventh official release.
Please be sure to update fusee when upgrading to 1.6.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.6.2 is bundled with hbl 2.4.4, and hbmenu 3.6.0.
The following was changed since the last release:
erpt
was updated to support the latest official behavior.jpegdec
was updated to support the latest official behavior.pm
was updated to support the latest official behavior.And the following was changed in 1.6.1:
haze
, including:
haze
configures bMaxPacketSize0
which improves support for USB3.And the following was changed in 1.6.0:
exosphère
was updated to reflect the latest official secure monitor behavior.mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official behavior.erpt
was partially updated to support the latest official behavior.monitor wait <hex program id>
, where program id can optionally have an 0x
prefix.haze
for editing files in-place and performing 64-bit transfers (files larger than 4 GB).bpc.mitm
was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
For information on the featureset supported by 1.6, please see the official release notes.
Published by SciresM about 1 year ago
1.6.1 is Atmosphère's seventy-sixth official release.
Please be sure to update fusee when upgrading to 1.6.1. fusee-primary no longer exists, and will not work any more.
Note: switch/haze.nro
was updated in the release zip on 2023/10/16 at 3:40 PM PDT to fix an issue where haze could fail to work on Windows. The updated zip has a build hash of "7f4450f93".
Please note: Atmosphère 1.6.1 is currently in pre-release, and issues may be found that need to be fixed before full release.
With thanks to the @switchbrew team, Atmosphère 1.6.1 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
haze
, including:
haze
configures bMaxPacketSize0
which improves support for USB3.And the following was changed in 1.6.0:
exosphère
was updated to reflect the latest official secure monitor behavior.mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official behavior.erpt
was partially updated to support the latest official behavior.monitor wait <hex program id>
, where program id can optionally have an 0x
prefix.haze
for editing files in-place and performing 64-bit transfers (files larger than 4 GB).bpc.mitm
was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
For information on the featureset supported by 1.6, please see the official release notes.
Published by SciresM about 1 year ago
1.6.0 is Atmosphère's seventy-fifth official release.
Please be sure to update fusee when upgrading to 1.6.0. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.6.0 is currently in pre-release, and issues may be found that need to be fixed before full release.
With thanks to the @switchbrew team, Atmosphère 1.6.0 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
exosphère
was updated to reflect the latest official secure monitor behavior.mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official behavior.erpt
was partially updated to support the latest official behavior.monitor wait <hex program id>
, where program id can optionally have an 0x
prefix.haze
for editing files in-place and performing 64-bit transfers (files larger than 4 GB).bpc.mitm
was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
For information on the featureset supported by 1.6, please see the official release notes.
Published by SciresM about 1 year ago
1.5.5 is Atmosphère's seventy-fourth official release.
Please be sure to update fusee when upgrading to 1.5.5. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.5.5 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.5.4 is Atmosphère's seventy-third official release.
Please be sure to update fusee when upgrading to 1.5.4. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.5.4 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
SciresM#0524
.
For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.5.3 is Atmosphère's seventy-second official release.
Please be sure to update fusee when upgrading to 1.5.3. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.5.3 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.5.2 is Atmosphère's seventy-first official release.
Please be sure to update fusee when upgrading to 1.5.2. fusee-primary no longer exists, and will not work any more.
Note: switch/haze.nro
was updated in the release zip on 2023/04/18 at 10:15 PM PDT to fix an issue where haze would create files on the device 12 bytes larger than they should be. The updated zip has "-fix1" in its name.
With thanks to the @switchbrew team, Atmosphère 1.5.2 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
haze
) was added for performing USB file transfer (with thanks to @liamwhite for both design and implementation).
haze
is included with atmosphère, and provides access to the SD card via the PTP/MTP protocol.
For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.5.1 is Atmosphère's seventieth official release.
Please be sure to update fusee when upgrading to 1.5.1. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.5.1 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
fatal
was updated to reduce memory footprint.
fatal
has no framebuffer or rendering logic, and instead calls other system service commands to draw the screen.atmosphere!enable_external_bluetooth_db = u8!0x1
./atmosphere/bluetooth_devices.db
.And the following was changed in 1.5.0:
mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official behavior.SciresM#0524
on discord for assistance.For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.5.0 is Atmosphère's sixty-ninth official release.
Please be sure to update fusee when upgrading to 1.5.0. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.5.0 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official behavior.SciresM#0524
on discord for assistance.For information on the featureset supported by 1.5, please see the official release notes.
Published by SciresM over 1 year ago
1.4.1 is Atmosphère's sixty-eighth official release.
Please be sure to update fusee when upgrading to 1.4.1. fusee-primary no longer exists, and will not work any more.
Note: The release build was updated on 2023/01/24 at 7:00 PM PST to fix a crash when closing WebApplets. The updated zip has a build hash of "-7a69f2f06".
With thanks to the @switchbrew team, Atmosphère 1.4.1 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
dmnt
cheat toggle files are no longer ignored when they are missing a trailing newline.erpt_reports
added in 1.3.0 was fixed.
mesosphère
to match official kernel behavior (spin lock assembly was corrected, wrong result on failure in in GetProcessId was corrected).ams.mitm
's memory usage was increased by 16 MB, to prevent crashing when building romfs for games with obscene file counts.
SciresM#0524
.
For information on the featureset supported by 1.4, please see the official release notes.
Published by SciresM about 2 years ago
1.4.0 is Atmosphère's sixty-seventh official release.
Please be sure to update fusee when upgrading to 1.4.0. fusee-primary no longer exists, and will not work any more.
Note: The following was changed since pre-release:
With thanks to the @switchbrew team, Atmosphère 1.4.0 is bundled with hbl 2.4.3, and hbmenu 3.5.1.
The following was changed since the last release:
mesosphère
was updated to reflect the latest official kernel behavior.ncm
was updated to reflect the latest official kernel behavior./*/Nintendo/Nintendo
instead of /*/Nintendo
.For information on the featureset supported by 1.4, please see the official release notes.
Published by SciresM over 2 years ago
1.3.2 is Atmosphère's sixty-sixth official release.
Please be sure to update fusee when upgrading to 1.3.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.3.2 is bundled with hbl 2.4.1, and hbmenu 3.5.1.
The following was changed since the last release:
loader
was updated to reflect the latest official behaviors.ro
was updated to reflect the latest official behaviors.For information on the featureset supported by 1.3, please see the official release notes.
Published by SciresM over 2 years ago
1.3.1 is Atmosphère's sixty-fifth official release.
Please be sure to update fusee when upgrading to 1.3.1. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.3.1 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
And the following was changed in 1.3.0:
mesosphère
was updated to reflect the latest official kernel behavior.erpt
was updated to reflect the latest official behaviors.pm
was updated to reflect the latest official behaviors.fatal
was updated to reflect the latest official behaviors.erpt_reports
was added.
/atmosphere/erpt_reports
, the folder will be cleaned to empty.erpt!disable_automatic_report_cleanup
= u8!0x1 in system_settings.ini.SciresM#0524
on discord.SciresM#0524
for help updating your program.For information on the featureset supported by 1.3, please see the official release notes.
Published by SciresM over 2 years ago
1.3.0 is Atmosphère's sixty-fourth official release. Who doesn't love round numbers?
Please be sure to update fusee when upgrading to 1.3.0. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.3.0 is currently in pre-release, and issues may be found that need to be fixed before full release.
Note: The fatal system module was updated in the pre-release zip on 2022/03/23 at 7:20 PM PDT to fix failure to detect the power button (and to auto-reboot) from the fatal
system module error screen. The updated zip has a build hash of "-b69fa1357".
With thanks to the @switchbrew team, Atmosphère 1.3.0 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
mesosphère
was updated to reflect the latest official kernel behavior.erpt
was updated to reflect the latest official behaviors.pm
was updated to reflect the latest official behaviors.fatal
was updated to reflect the latest official behaviors.erpt_reports
was added.
/atmosphere/erpt_reports
, the folder will be cleaned to empty.erpt!disable_automatic_report_cleanup
= u8!0x1 in system_settings.ini.SciresM#0524
on discord.SciresM#0524
for help updating your program.For information on the featureset supported by 1.3, please see the official release notes.
Published by SciresM over 2 years ago
1.2.6 is Atmosphère's sixty-third official release.
Please be sure to update fusee when upgrading to 1.2.6. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.2.6 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
For information on the featureset supported by 1.2, please see the official release notes.
Published by SciresM almost 3 years ago
1.2.5 is Atmosphère's sixty-second official release.
Please be sure to update fusee when upgrading to 1.2.5. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.2.5 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
mesosphère
to underreport the total memory size by 8MB for certain games which use newer system-resource-size memory management.
sm
that save 0x5000 of memory.mesosphère
manages updating the debug register for hardware single-step support.usb!usb30_force_enabled
on 13.0.0+.For information on the featureset supported by 1.2, please see the official release notes.
Published by SciresM almost 3 years ago
1.2.4 is Atmosphère's sixty-first official release.
Please be sure to update fusee when upgrading to 1.2.4. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.2.4 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
And the following was changed in 1.2.3:
SciresM#0524
-- all help finding/fixing bugs is appreciated, here.
atmosphere!enable_standalone_gdbstub
= u8!0x1 in system_settings.ini.
atmosphere!enable_htc
= u8!0x0, but this should be the case for everyone since ams.TMA isn't actually usable yet.aarch64-none-elf-gdb
for 64-bit or arm-none-eabi-gdb
for 32-bit).
target extended-remote <ip address>:22225
.info os processes
to get a list of process IDs that can be attached to.
monitor get info
: Get process info, address space layout, and information on modules.monitor get mappings
: Get all memory mappings.monitor get mapping <addr>
: Get the memory mapping for a specific address.monitor wait application
: Causes the stub to wait for an application to be launched. The next application will be started suspended.
attach <pid>
after launching, which will cause attach-on-first-instruction. Failure to attach may cause system instability, this probably needs work.SciresM#0524
.
creport
now attempts to parse symbol tables if present.
For information on the featureset supported by 1.2, please see the official release notes.
Published by SciresM almost 3 years ago
1.2.3 is Atmosphère's sixtieth official release.
Please be sure to update fusee when upgrading to 1.2.3. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.2.3 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
SciresM#0524
-- all help finding/fixing bugs is appreciated, here.
atmosphere!enable_standalone_gdbstub
= u8!0x1 in system_settings.ini.
atmosphere!enable_htc
= u8!0x0, but this should be the case for everyone since ams.TMA isn't actually usable yet.aarch64-none-elf-gdb
for 64-bit or arm-none-eabi-gdb
for 32-bit).
target extended-remote <ip address>:22225
.info os processes
to get a list of process IDs that can be attached to.
monitor get info
: Get process info, address space layout, and information on modules.monitor get mappings
: Get all memory mappings.monitor get mapping <addr>
: Get the memory mapping for a specific address.monitor wait application
: Causes the stub to wait for an application to be launched. The next application will be started suspended.
attach <pid>
after launching, which will cause attach-on-first-instruction. Failure to attach may cause system instability, this probably needs work.SciresM#0524
.
creport
now attempts to parse symbol tables if present.
For information on the featureset supported by 1.2, please see the official release notes.
Published by SciresM almost 3 years ago
1.2.2 is Atmosphère's fifty-ninth official release.
Please be sure to update fusee when upgrading to 1.2.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.2.2 is bundled with hbl 2.4.1, and hbmenu 3.5.0.
The following was changed since the last release:
mesosphère
, including:
And the following was changed in 1.2.1:
mesosphère
was updated to reflect the kernel behavioral changes made in 13.1.0.
erpt
was updated to reflect the latest official behaviors.
mesosphère
, including:
virt
board.
SciresM#0524
if you are capable and interested.
For information on the featureset supported by 1.2, please see the official release notes.