Bot releases are hidden (Show)
Published by SciresM over 5 years ago
0.9.0 is Atmosphère's eighteenth official release.
fusee-primary was last updated in: 0.9.0.
With thanks to the @switchbrew team, Atmosphère 0.9.0 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
dmnt
's Cheat VM was extended to add a new debug opcode.emummc!emummc_enabled
= 1.emummc!emummc_sector
to the start sector of your partition (e.g., emummc_sector = 0x1A010000
).emummc!emummc_path
to the folder (with archive bit set) containing the NAND boot partitions' files "boot0" and "boot1", and the raw NAND image files "00", "01", "02", etc. (single "00" file with the whole NAND image requires exFAT mode while multipart NAND can be used in both exFAT and FAT32 modes).Nintendo
contents directory can be redirected arbitrarily.
emummc/Nintendo_XXXX
, where XXXX
is the hexadecimal representation of the emummc's ID.
emummc!emummc_id
in emummc.ini.emummc!emummc_nintendo_path
.For information on the featureset supported by 0.9.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.10 is Atmosphère's seventeenth official release.
fusee-primary was last updated in: 0.8.10.
With thanks to the @switchbrew team, Atmosphère 0.8.10 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
atmosphere/titles/<title id>/config.ini
for the game.override_config!override_language
.
ja
, en-US
, fr
, de
, it
, es
, zh-CN
, ko
, nl
, pt
, ru
, zh-TW
, en-GB
, fr-CA
, es-419
, zh-Hans
, zh-Hant
.override_config!override_region
.
jpn
, usa
, eur
, aus
, chn
, kor
, twn
.boot
system module.
boot
is responsible for performing hardware initialization, showing the Nintendo logo, and repairing NAND on system update failure.boot
implementation preserves AutoRCM during NAND repair.
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.9 is Atmosphère's sixteenth official release.
fusee-primary was last updated in: 0.8.9.
With thanks to the @switchbrew team, Atmosphère 0.8.9 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
sm
when actively using it.
sm
, in the case where sm:
is not yet registered.
atmosphere!fatal_auto_reboot_interval
to a non-zero u64 value, fatal can be made to automatically reboot after a certain number of milliseconds.ro
system module.
ro
is responsible for loading dynamic libraries (NROs) on 3.0.0+.
loader
.ro
provides this functionality (ldr:ro
, ro:dmnt
) on all firmware versions./atmosphere/nro_patches/<user-defined patch name>/<Hex Build-ID for NRO to patch>.ips
will be applied, allowing for easy distribution of patches.spl
system module.
spl
(Secure Platform Services) is responsible for cryptographic operations, including all communications with the secure monitor (exosphère).For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.8 is Atmosphère's fifteenth official release.
fusee-primary was last updated in: 0.8.8.
With thanks to the @switchbrew team, Atmosphère 0.8.8 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.7 is Atmosphère's fourteenth official release.
fusee-primary was last updated in: 0.8.4.
With thanks to the @switchbrew team, Atmosphère 0.8.7 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
atmosphere!fsmitm_redirect_saves_to_sd
to 1 in system_settings.ini
.For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.6 is Atmosphère's thirteenth official release.
fusee-primary was last updated in: 0.8.4.
With thanks to the @switchbrew team, Atmosphère 0.8.6 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
atmosphere/titles/<title id>/cheats/toggles.txt
when either toggles were successfully loaded from that file or the system setting atmosphere!dmnt_always_save_cheat_toggles
is non-zero.hbl_config!override_any_app
is true in loader.ini
.
hbl_config!title_id=app
setting was deprecated. Support will be removed in Atmosphère 0.9.0.sdmc:/atmosphere/hbl_html
folder.
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.5 is Atmosphère's twelfth official release.
fusee-primary was last updated in: 0.8.4.
With thanks to the @switchbrew team, Atmosphère 0.8.5 is bundled with hbl 2.1, and hbmenu 3.0.1.
The following was changed since the last release:
!L
is used for title content override (this is configurable by editing default_config!override_key
in loader.ini
)atmosphere/titles/<title id>/config.ini
, and editing override_config!override_key
.hekate
) to extract the components bundled inside release binaries.dmnt
sysmodule, which will also reimplement Nintendo's Debug Monitor in the future.dmnt:cht
), that will allow user homebrew to interface with and control Atmosphère's cheat manager.
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.4 is Atmosphère's eleventh official release.
fusee-primary was last updated in: 0.8.4.
The following was changed since the last release:
sept
, which can be signed, encrypted, and then loaded by Nintendo's TSEC firmware.sept
will derive the keys needed to boot new firmware, and then load sept/payload.bin
off the SD card and jump to it.0x0100000000000000
-0x01FFFFFFFFFFFFFF
) is now enforced.set.mitm
and fs.mitm
were merged into a single ams_mitm
sysmodule.
bpc.mitm
component was added, performing custom behavior on shutdown/reboot requests from am
or applications.
system_settings.ini
.For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM over 5 years ago
0.8.3 is Atmosphère's tenth official release.
fusee-primary was last updated in: 0.8.3.
The following was changed since the last release:
atmosphere/system_settings.ini
, see here for documentation.sm:dmnt
service.
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.8.2 is Atmosphère's ninth official release.
fusee-primary was last updated in: 0.8.2.
The following was changed since the last release:
Key Derivation Failed!
.
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.8.1 is Atmosphère's eighth official release.
fusee-primary was last updated in: 0.8.1.
The following was changed since the last release:
Failed to enable SMMU!
if fusee had previously rebooted.
bis_protect
functionality that could cause NS to be able to overwrite BCT public keys.
debugmode
based on the exosphere
section of BCT.ini
:
debugmode = 1
will cause exosphere to tell the kernel that debugmode is active.debugmode_user = 1
will cause exosphere to tell userland that debugmode is active.nogc
functionality; thanks to @rajkosto for the patches.
nogc
patches will automatically apply if the user is booting into 4.0.0+ with fuses from <= 3.0.2.nogc
entry in the stratosphere
section of BCT.ini
:
nogc = 1
will force enable nogc
patches.nogc = 0
will force disable nogc
patches.nogc
patches after updating to an unsupported system version.exosphere
allowing userland applications to cause the system to reboot into RCM:
smcSetConfig(id=65001, value=<nonzero>);
user homebrew can use splSetConfig
for this.fatal
for when an Atmosphère API version mismatch is detected (2495-1623).For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.8.0 is Atmosphère's seventh official release.
fusee-primary was last updated in: 0.8.0.
The following was changed since the last release:
fatal
system module was added.
fatal
does not create error reports.fatal
draws a custom error screen, showing registers and a backtrace.fatal
attempts to gather debugging info for all crashes, and not just ones that include info.fatal
will attempt saving reports to the SD, if a crash report was not generated by creport
.atmosphere/titles/<tid>/%s.flag
, flags are now located in atmosphere/titles/<tid>/flags/%s.flag
atmosphere/flags/hbl_%s.flag
.sm
now informs mitm services of a new session's process id, enabling custom handling based on title id/process id.ns
sysmodule is no longer allowed to write the BCT public keys; all other processes can.
bis_write
flag for a title will allow it to write to BIS.cal_read
flag for a title will allow it to read CAL0.fs.mitm
maintains a file handle to this backup, so userland software cannot read it.fs.mitm
now mitms all sessions for non-system modules; content overriding has been made separate from service interception.atmosphere/prod.keys
or atmosphere/dev.keys
For information on the featureset supported by 0.8.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.7.5 is Atmosphère's sixth official release.
fusee-primary was last updated in: 0.7.0.
The following was changed since the last release:
For information on the featureset supported by 0.7.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.7.4 is Atmosphère's fifth official release.
fusee-primary was last updated in: 0.7.0.
The following was changed since the last release:
make dist
target now includes the branch in the generated zip name.For information on the featureset supported by 0.7.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.7.3 is Atmosphère's fourth official release.
fusee-primary was last updated in: 0.7.0.
The following was changed since the last release:
<Actual version> (AMS <x>.<y>.<z>)
.For information on the featureset supported by 0.7.0, please see the official release notes.
Published by SciresM almost 6 years ago
0.7.2 is Atmosphère's third official release.
fusee-primary was last updated in: 0.7.0.
The following was changed since the last release:
make dist
target.For information on the featureset supported by 0.7.0, please see the official release notes.
Published by SciresM about 6 years ago
0.7.1 is Atmosphère's second official release.
fusee-primary was last updated in: 0.7.0.
The following was changed since the last release:
For information on the featureset supported by 0.7.0, please see the official release notes.
Published by SciresM about 6 years ago
0.7.0 is Atmosphère's first official release.
It supports the following featureset:
/atmosphere/kip_patches/<user-defined patch name>/<SHA256 of KIP>.ips
will be applied to the relevant KIPs, allowing for easy distribution of patches supporting multiple versions.
/atmosphere/kernel_patches/<user-defined patch name>/<SHA256 of Kernel>.ips
will be applied to the kernel, allowing for easy distribution of patches supporting multiple versions.
BCT.ini
on the SD card./atmosphere/titles/<titleid>/exefs/
, if present./atmosphere/titles/<titleid>/exefs.nsp
will fully replace the original exefs./atmosphere/exefs_patches/<user-defined patch name>/<Hex Build-ID for NSO to patch>.ips
will be applied, allowing for easy distribution of patches supporting multiple firmware versions and/or titles.FsStorageId_None
on launch./atmosphere/titles/<title ID>/boot2.flag
file on their SD card./atmosphere/titles/<title ID>/romfs.bin
, and all loose files in /atmosphere/titles/<title ID>/romfs/
, and merge them together into a single RomFS image./atmosphere/titles/<title ID>/fsmitm.flag
file on the SD card./atmosphere/titles/<title ID>/fsmitm_disable.flag
file on the SD card./atmosphere/crash_reports/<timestamp>_<title ID>.log
.erpt
sysmodule, this disables all crash report related telemetry.