esphome-seplos-bms

What's Changed

• Fix CI by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/48
• Rename uart0 to uart_0 by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/54
• Fix preamble synchronization by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/49
• Use device class battery by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/61
• Add Seplos BMS v3 support by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/64
• Add Apex BMS 48V200A / Apex 48200 / 48200-1101-10E-JK06-16S as supported by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/75
• Apply offset to temperature sensor measurements by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/81
• Mention available registers and protocol description by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/82
• Change register type to read by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/83
• Fix lint-clang-tidy job by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/84
• Add a Seplos V3 example to talk to multiple devices by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/91
• Fix decimal place of the SOC (v3) by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/93
• Fix temperature sensor offset by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/94
• Add Seplos BMS V3.0 Type C as supported by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/104
• Add UART sniffer example by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/106
• Add ESP32 UART sniffer example by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/107
• Validate all YAML configurations by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/108
• Improve pre-commit hooks by @syssi in https://github.com/syssi/esphome-seplos-bms/pull/109

Full Changelog: https://github.com/syssi/esphome-seplos-bms/compare/1.1.0...1.2.0

Boqiang BMS support using protocol version 2.6 added.