homebridge-syno-spk

Homebridge Package for Synology DSM 7.

GPL-3.0 License

Stars
602
Committers
10
View Code on GitHub
Ecosystems: Homebridge, Docker

Bot releases are visible (Hide)

homebridge-syno-spk - 3.1.1 Latest Release

Published by github-actions[bot] 10 months ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.1.0

Published by github-actions[bot] 10 months ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v20 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.21

Published by github-actions[bot] 10 months ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.20

Published by github-actions[bot] 11 months ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • rtd1619b (armv8) - DS124, DS223, DS223j, DS423
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.17

Published by github-actions[bot] about 1 year ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Dependencies

This package will leverage the Synology supplied NodeJS v18 package.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.16

Published by github-actions[bot] over 1 year ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models ( braswell )
  • evansport (i686) - DS214play, DS414play, DS415play ( evansport )
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.15

Published by github-actions[bot] over 1 year ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Bundled versions

  • NodeJS v18.16.1 LTS
  • Homebridge v1.6.1
  • Homebridge-config-ui-x v4.50.4

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.9

Published by github-actions[bot] about 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.8

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.7

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.6

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All 64 bit Intel / AMD CPU Models
  • evansport (i686) - DS214play, DS414play, DS415play
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.5

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • armv8 - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • armv7 - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.4

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • armv8 - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • armv7 - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.3

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • armv8 - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • armv7 - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

If you have the Synology Firewall enabled, make a rule to allow access to port 8581 and the port Homebridge was assigned too.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.2

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • alpine (armv7) - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.1

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • armv8 - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j
  • armada38x (armv7) - DS419slim, DS218j, RS217, RS816, DS416j, DS416slim, DS216, DS216j, DS116
  • armv7 - DS1817, DS1517, DS416, DS2015xs, DS1515, DS715, DS215+

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 3.0.0

Published by github-actions[bot] over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Breaking Changes

⚠️ Version v3.x.x contains breaking changes for users upgrading from v2.x.x or earlier. Plugins will require re-installation. You should create a backup before upgrading.

Supported Models

  • x86_64 - All Intel / AMD 64 bit CPU Models
  • rtd1296 (armv8) - DS420j, DS220j, RS819, DS418, DS218, DS218play, DS118
  • armada37xx (armv8) - DS120j, DS119j

Installation

This package will deploy Homebridge and the Homebridge UI natively on your Synology NAS. It will create a new shared named homebridge to store the Homebridge configuration and user data.

Add the Homebridge Synology Package Source:

  1. Open Package Center in DSM and select the Settings option.
  2. Select the Package Sources tab.
  3. Click Add
  4. In the Name section enter Homebridge
  5. In the Location section enter https://synology.homebridge.io
  6. Click OK

Install Homebridge:

  1. Go back to Package Center and search for Homebridge
  2. Click on the Homebridge package then select Install
  3. Click Agree when warned about using a package from an unknown publisher.
  4. Click Done to confirm installation.

Please note low power device make take 10-15 minutes to install the package.

The Homebridge UI app starts on port 8581. The default username is admin with password admin.

Recommended Post-Install Steps:

If you like the Homebridge UI or the Homebridge Synology Package Installer please consider donating via PayPal ❤️

homebridge-syno-spk - 2.2.4

Published by oznu over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

Choose the correct download for your Synology Model:

Please note low power device make take 10-15 minutes to install the package.

Recommended Post-Install Steps:

Change Log

  • Node.js v16.14.2
homebridge-syno-spk - 2.2.3

Published by oznu over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

x86_64 models (Intel / AMD):

homebridge-braswell-2.2.3.spk (21.1 MB)

arm64 models (DS118, DS218play, DS218, DS418, RS819, DS220j, DS420j, DS120j, DS119j):

homebridge-rtd1296-2.2.3.spk (20.5 MB)

Please note low power device make take 10-15 minutes to install the package.

Recommended Post-Install Steps:

Change Log

  • Node.js v16.14.2
  • Fixed issue with generating backups #79
homebridge-syno-spk - 2.2.2

Published by oznu over 2 years ago

For DSM 7.x.x only.

This package does not use Docker. If you are currently running Homebridge in Docker, create a backup and remove the container before installing this package.

x86_64 models (Intel / AMD):

homebridge-braswell-2.2.2.spk (21.1 MB)

arm64 models (DS118, DS218play, DS218, DS418, RS819, DS220j, DS420j, DS120j, DS119j):

homebridge-rtd1296-2.2.2.spk (20.5 MB)

Please note low power device make take 10-15 minutes to install the package.

Recommended Post-Install Steps:

Change Log

  • Node.js v16.14.0
  • Support for DSM 7
Badges
Extracted from project README
GitHub release Build and Publish Donate
Related Projects
virtual-dsm

Virtual DSM in a Docker container.

26 Mar 2023 2,157
docker-homebridge

Homebridge Docker. HomeKit support for the impatient using Docker on x86_64, Raspberry Pi (armhf)...

12 Mar 2017 2,571
synology-pihole

Install or Update Pi-Hole as Docker Container on a Synology NAS with a Static IP Address

19 Sep 2020 57