esphome-mitsubishiheatpump

I'm pleased to announce that after a couple of years of deferred maintenance that this component finally has some updates.

Version 2.5.0 adds compatibility with ESPHome 2024.6.x, adds documentation updates for ESP32 chips, adds several new fan modes on supported hardware, and fixes some crashes in the logging routines.

What's Changed

• Cast pointers to void* before comparision by @geoffdavis in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/86
• Esp32 doc updates by @geoffdavis in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/87
• Feature: Configurable UART pins by @pauln in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/91
• Update README.md by @TheDK in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/102
• Use fully qualified names in header by @sprocketstech in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/101
• README.md: Minor markdown formatting/quoting by @dmcc in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/93
• Added clarification for hardware_serial & baud_rate setting by @anth-dinosaur in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/89
• Fix two bits of debugging output by @nathanjw in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/108
• Edit README notes on baud rate and external temperature sensor by @wtadler in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/105
• feat: Add callback to log raw packets by @KazWolfe in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/116
• Add vertical and horizontal vane position controls by @nathanjw in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/109
• Fix KeyError in ESPHome 2024.6.X by @ghisch in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/153
• Fixes logging crash in fan mode and swing. by @tlm in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/126
• Mark component as failed if serial conflict is detected by @stewartadam in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/143
• Fix version pinning of SwiCago/HeatPump library by @stewartadam in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/125
• Prep for release 2.5.0 by @geoffdavis in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/155

New Contributors

• @pauln made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/91
• @TheDK made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/102
• @sprocketstech made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/101
• @dmcc made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/93
• @anth-dinosaur made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/89
• @nathanjw made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/108
• @wtadler made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/105
• @KazWolfe made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/116
• @ghisch made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/153
• @tlm made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/126
• @stewartadam made their first contribution in https://github.com/geoffdavis/esphome-mitsubishiheatpump/pull/143

Full Changelog: https://github.com/geoffdavis/esphome-mitsubishiheatpump/compare/2.4.1...2.5.0