Advanced firmware to add native Apple HomeKit and custom configurations, compatible with any SoC based on ESP32, ESP32-S, ESP32-C and ESP8266 series. (Shelly, Sonoff, Electrodragon, Tuya...)
OTHER License
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
For new installations use last version of fullhaaboot.bin from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog HAA:
Changelog HAA OTA v4.2.6:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog HAA:
Changelog HAA OTA v4.2.5:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
Published by RavenSystem about 4 years ago
Published by RavenSystem about 4 years ago
Published by RavenSystem about 4 years ago
Changelog:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
Changelog:
"0"
of config section. Before it was always LOW.Read Wiki for more info.
Published by RavenSystem about 4 years ago
Changelog HAA v3.5.2:
Changelog HAA OTA v4.2.2:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
Changelog:
Changelog 3.5.0:
"sn":"<text>"
to customize serial number prefix. Can be used in config section to be applied to all accessories, or into an accessory declaration; this last overrides config section. Using "sn":"cn"
Homekit config number will be used as prefix.Read Wiki for more info.
Published by RavenSystem about 4 years ago
Changelog:
"sn":"<text>"
to customize serial number prefix. Can be used in config section to be applied to all accessories, or into an accessory declaration; this last overrides config section. Using "sn":"cn"
Homekit config number will be used as prefix.Read Wiki for more info.
Published by RavenSystem about 4 years ago
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog HAA v3.4.5 and HAA OTA v4.2.1:
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog:
Changelog HAA 3.4.0:
Changelog HAA OTA 4.2.0:
Changelog HAA 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog HAA 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog:
"cd":N
work unit. Now it works with float in seconds."cd":N
to general config to set a delay in seconds before creation of first accessory, but after "0"
device action execution.Changelog HAA 3.4.0:
Changelog HAA OTA 4.2.0:
Changelog HAA 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog HAA 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog:
Changelog HAA 3.4.0:
Changelog HAA OTA 4.2.0:
Changelog HAA 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog HAA 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog:
"5"
.Changelog HAA 3.4.0:
Changelog HAA OTA 4.2.0:
Changelog HAA 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog HAA 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
VERY IMPORTANT:
New installations are incompatible with old fullhaaboot.bin files and even with an initial working installation, issues can appear in the future.
Please, use last version from https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation.
Changelog HAA:
Changelog HAA OTA 4.2.0:
Changelog HAA 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog HAA 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
IMPORTANT: New installations are incompatible with old fullhaaboot.bin files. Please, use last version.
Changelog:
Changelog 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.
Published by RavenSystem about 4 years ago
IMPORTANT: New installations are incompatible with old fullhaaboot.bin files. Please, use last version.
Changelog:
Changelog 3.3.0:
"ct":N
key."d":
option to disable ping action when Wifi connection is lost. Default: "d":0
."0":
At boot."1":
After accessories declaration."2":
After first Wifi connection."3":
Wifi reconnection."4":
Wifi disconnection."5":
Wifi keeps disconnected after 20 retries.Changelog 3.2.0:
"t":13
Must be managed with a third-party HomeKit client. It can be problematic. This accessory works like a binary sensor, and it only sends a notification when status 0
is reached. It allows power monitoring too, like other sensors."ct":N
in config section. Values are:Wiki will be updated as soon as possible.
Read Wiki for more info.