Bot releases are visible (Hide)
Published by Dendraspis 6 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
&color=hsl(210%2C%2060%25%2C%2050%25))
&color=hsl(210%2C%2060%25%2C%2050%25))
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
&color=hsl(110%2C%2060%25%2C%2040%25))
[!NOTE]
This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or runningv2.37.x, you just need to download and replace the (extracted)StaxRip.exefile.
[!IMPORTANT]
This update will destroy your existingSvtAv1EncAppprofiles. You have to take care and re-set them! Be aware that this is also valid for existing jobs!
Changelog:
v2.37.5 (2024-04-06)
- UI: Fix asking for Project saving on Templates
- UI: Optimize ignorable Output Mod warning (#1285)
- SvtAv1EncApp: Update settings and parameters to v2.0.0 (#1273)
- vvencFFapp: Fix display for Compression Check Run (#1284)
v2.37.4 (2024-03-28)
- UI: Trigger event "While Processing" more often, but also time limited
- UI: Make timeout for error messages on job processing optional
- UI: Convert tabs to spaces on Processing window for better looking output (#1243)
- UI: Fix not asking for Project saving when dropping file under some circumstances
- UI: Make Output Mod warning ignorable (#1285)
v2.37.3 (2024-03-23)
- UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
- UI: Set Process Priority from "Idle" to "Below Normal"
- NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)
v2.37.2 (2024-03-22)
- UI: Extend Crop window with Time information (#1274)
- UI: Update and extend Show Changelog
- UI: Update and adjust Updater
v2.37.1 (2024-03-18)
- UI: Fix crash on AutoCrop selection in Options on Templates (#1276)
v2.37.0 (2024-03-17)
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=82)
Published by Dendraspis 7 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
[!NOTE]
This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or runningv2.37.x, you just need to download and replace the (extracted)StaxRip.exefile.
Changelog:
v2.37.4 (2024-03-28)
- UI: Trigger event "While Processing" more often, but also time limited
- UI: Make timeout for error messages on job processing optional
- UI: Convert tabs to spaces on Processing window for better looking output (#1243)
- UI: Fix not asking for Project saving when dropping file under some circumstances
- UI: Make Output Mod warning ignorable (#1285)
v2.37.3 (2024-03-23)
- UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
- UI: Set Process Priority from "Idle" to "Below Normal"
- NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)
v2.37.2 (2024-03-22)
- UI: Extend Crop window with Time information (#1274)
- UI: Update and extend Show Changelog
- UI: Update and adjust Updater
v2.37.1 (2024-03-18)
- UI: Fix crash on AutoCrop selection in Options on Templates (#1276)
v2.37.0 (2024-03-17)
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=77)
Published by Dendraspis 7 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
[!NOTE]
This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or runningv2.37.x, you just need to download an replace the (extracted)StaxRip.exefile.
Changelog:
v2.37.3 (2024-03-23)
- UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
- UI: Set Process Priority from "Idle" to "Below Normal"
- NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)
v2.37.2 (2024-03-22)
- UI: Extend Crop window with Time information (#1274)
- UI: Update and extend Show Changelog
- UI: Update and adjust Updater
v2.37.1 (2024-03-18)
- UI: Fix crash on AutoCrop selection in Options on Templates (#1276)
v2.37.0 (2024-03-17)
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=55)
Published by Dendraspis 7 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
[!NOTE]
This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or runningv2.37.x, you just need to download an replace the (extracted)StaxRip.exefile.
Changelog:
v2.37.2 (2024-03-22)
- UI: Extend Crop window with Time information (#1274)
- UI: Update and extend Show Changelog
- UI: Update and adjust Updater
v2.37.1 (2024-03-18)
- UI: Fix crash on AutoCrop selection in Options on Templates (#1276)
v2.37.0 (2024-03-17)
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=61)
Published by Dendraspis 7 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
[!IMPORTANT]
This is "just" an extension/hotfix for StaxRip v2.37.0. If you have it already downloaded or running, you just need to download an replace the (extracted)StaxRip.exefile.
Changelog:
v2.37.1 (2024-03-18)
- Fix crash on AutoCrop selection in Options on Templates (#1276)
v2.37.0 (2024-03-17)
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=101)
Published by Dendraspis 7 months ago
[!TIP]
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
[!NOTE]
Please check out the Changelog as always to know what has changed and start with fresh settings to avoid side effects. In case you want to use the old settings, double-check the templates and settings for the encoders mentioned in the Changelog!
When it comes to Dolby Vision and Cropping I highly recommend reading this updated guide, especially when you think the crop is not correct: Encoding Dolby Vision with StaxRip
[!IMPORTANT]
In case you have problems extracting the archive, please update your extraction tool or use 7-Zip.
Because some users reported this problem, I have re-uploaded the (same) release with another compression.
Special thanks to the new Donator and Contributors who support this project. I really appreciate you! ❤️
Changelog:
- UI: Enhance Auto Crop for Dolby Vision sources
- UI: Improve handling with Dolby Vision videos and manual cropping
- UI: Re-read modified Dolby Vision metadata automatically on window focus
- UI: Improve Dolby Vision metadata handling
- UI: Enhance "Frame Mismatch" error message
- UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
- UI: Write "Media Info Source File" only if it has changed (#1221)
- UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
- UI: Fix rounding issue with number edits when using mouse wheel (#1253)
- UI: Fix rare crash on Audio and Muxer window opening
- FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
- NVEncC: Rearrange some parameters (#1240)
- NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
- NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
- NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
- NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
- QSVEncC: Enable Dolby Vision only when H265 is selected
- SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
- VCEEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Fix problem with missing space before parameter call
- VCEEncC: Remove Dolby Vision support
- x265: Add "--auto-aq" parameter (#1241)
- Update tools
- DeeZy v0.1.8
- eac3to v3.50
- MKVToolNix v83.0
- MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
- NVEncC v7.46
- Python v3.12.2
- QSVEncC v7.62
- rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
- Subtitle Edit v4.0.4
- SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
- VapourSynth R66
- VCEEncC v8.22
- vvencFFapp v1.11.1
- x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- eedi3_resize16 v3.3.16
- JPSDR v3.3.5 (W7 AVX2)
- TIVTC v1.0.29
- Update Dual plugins
- ffms2 v5.0 RC3
- L-SMASH-Works v1183 [20240317]
- Update VapourSynth plugins
- HQDN3D v1.00 mod
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=101)
Published by Dendraspis 8 months ago
💡 The last two releases had to be rushed to prevent users creating broken Dolby Vision encodes. Because of that many related issues are fixed and improved with this release. When it comes to Dolby Vision and Cropping I highly recommend reading this updated guide, especially when you think the crop is not correct:
Encoding Dolby Vision with StaxRip using x265, NVEncC, QSVEncC, VCEEncC
Please check out the Changelog as always to know what has changed and start with fresh settings to avoid side effects.
Special thanks to the Contributors who helped me testing different scenarios for the Dolby Vision metadata handling.
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive:
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=222)
Changelog:
- UI: "Import VUI metadata" doesn't override Dolby Vision profile depending on selected mode (#1212)
- UI: Extend Assistant check for VBV settings when using Dolby Vision to custom parameters (#1213)
- UI: Fix Crop bug that caused unnecessary and sometimes wrong cropping
- UI: Set "Output Mod" default value to 2 (inspired by the poll on Discord)
- UI: Improve handling/finding with metadata files
- UI: Fix issue with dovi_tool not being able to handle paths with comma (#1238)
- UI: Add threshold for cropping Dolby Vision videos based on metadata
- UI: Split command "ShowHardcodedSubtitleDialog" into "[..]DialogFromLastSourceDir" and "[..]DialogFromTempDir" (#1199)
- UI: Add new event "While Processing" which is called once every percent of progress on video encoders (#1197)
- UI: Add new macros that are currently only supported by the new "While Processing" event
- %commandline%, %progress%, %progressline%
- UI: Add new macros
- %jobs%, %jobs_active%
- UI: Improve filename parsing for subtitles (#1200), (#1220)
- UI: Improve track name parsing from filenames (#1220)
- UI: Improve Resize filter Assistant check for Dolby Vision
- UI: Add ".mks" to valid subtitle file types (#1227)
- UI: Adjust resize slider on main window
- UI: Make Settings window a bit higher (#1211)
- NVEncC: Add support for Dolby Vision metadata handling
- NVEncC: Fix wrong "--vpp-resize" parameter options visibility
- QSVEncC: Add support for Dolby Vision metadata handling
- QSVEncC: Add "Show advanced QP settings"
- QSVEncC: Add "--vpp-denoise-dct" parameter
- VCEEncC: Add support for Dolby Vision metadata handling
- VCEEncC: Add Dolby Vision parameters to encoder options
- VCEEncC: Fix "--cqp" parameter value for HEVC codec (#1222)
- Update tools
- mpv.net v7.1.1.0
- Python v3.11.7
- QSVEncC v7.61
- vvencFFapp v1.11.0 RC1 7dae9ea
- Update Dual plugins
- ffms2 v3.0.1.0 1357+34 r1391 4fbfa13ea1 StvG
- Update VapourSynth plugins
- libhistogram v2.0 2021-11-13
Published by Dendraspis 9 months ago
⚠️ Important:
This one is an important update for everyone, who also uses sources with Dolby Vision metadata and wants to transfer them to the encode/target properly while cropping the image. As it turned out, a lot of guides and information are wrong, misleading or at least incomplete from a general point of view. It took me hours to get and verify all the information about that topic and develop a way to ensure all different types of sources are treated the right way, so the encode will be as accurate as possible.
Basically almost everything should be straight forward and handled by StaxRip, definitely a lot easier, faster and less error prone than before. Please make sure to run a new instance with new settings and jobs to avoid side effects like lost or changed settings and handling.
So what has changed regarding the Dolby Vision handling:
- Currently only
x265is supported! - Currently using the
Customsection to add Dolby Vision parameters by hand will interfere with the procedures, so please avoid that. - For the actual metadata to be included, you have to use
Import VUI metadata- nothing new, but I wanted to mention it. - The
VBV settingshave to be manually set as required by the encoder. In a future version the values might get set by StaxRip, but currently you have to do it by hand. If not, the Assistant will help you. - The
Auto Crop on openingfeature, that was activated by enabling theCropfilter on a template, moved to theOptions. Now you can decide betweenNo auto cropping,Dolby Vision sources only, which uses the metadata to set the right crop, andOn all sourceswhich uses the normalAuto Cropfeature in case no Dolby Vision metadata was found. -
eac3towill be forced to extract also theEnhancement Layerand use it to extract the metadata depending your choice onExtract HDR metadata. - When dealing with Dolby Vision metadata,
ResizeandCuttingfilters are currently not allowed. In case of a problem, the Assistant will guide you. You can avoid that by putting the code into a different filter as the Assistant only checks for the filter names. Be aware that you will probably mess up with the result! - When dealing with Dolby Vision metadata, the
Cropfeature is limited. In case of a problem, the Assistant will guide you. You can avoid that by putting the code into a different filter as the Assistant only checks for theCropfilter. Be aware that you will probably mess up with the result!
Special thanks to @Morku for testing some scenarios and finding some bugs. 🙏
🤔 There is no way I have mentioned everything I wanted to. 😅
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=100)
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive:
Special thanks to the few Donators and Contributors who keep StaxRip alive. ❤️
Changelog:
- eac3to: Let eac3to extract the Enhancement Layer for metadata extraction
- eac3to: Let eac3to don't overwrite existing video files
- UI: Set "Output Mod" default value to 4
- UI: Fix eac3to window title
- UI: Fix setting Crop from/to Dolby Vision RPU files
- UI: Move "Auto Crop on opening" to Options
- UI: Extend "Auto Crop on opening" to run only when Dolby Vision metadata exists
- UI: Let "Auto Crop" use Dolby Vision metadata to set the crop values
- UI: Some small but cool stuff I have forgotten to write down
- Update tools
- DeeZy v0.1.7
- eac3to v3.48
- MediaInfo v24.01
Published by Dendraspis 9 months ago
Special thanks to the few Donators and Contributors who keep StaxRip alive. ❤️
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive:
💡 This release is a regular release again, so I recommend using fresh/new settings, otherwise be careful because of possible side effects.
⚠️ There was a annoying bug that caused a crash when a specific project was saved. If you've downloaded the release before, just use the hotfix to replace StaxRip.exe. Sorry for the inconvenience. 😞
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=111)
Changelog:
- CommandLine: Add new parameter "-SetCrop" to set the crop values, best used with a source file as first parameter
- UI: Fix delay when opening and closing Muxer/Container options window
- UI: Fix Assistant displaying issues
- UI: Fix crash on sources with multiple video tracks on newer versions of eac3to
- UI: Fix Dolby Vision wrong RPU file handling (#1190)
- UI: When a Dolby Vision metadata file is used for "Import VUI metadata", the Crop filter will be applied
- UI: Let "HDR metadata extraction" also set the json file when an rpu file was found/set
- UI: Add option to save Preview window size (#986)
- UI: Improve "Output Highlighting"
- NVEncC: Add --vpp-denoise-dct parameter
- x265: Add Assistant check for VBV settings when using DolbyVision
- Update tools
- chapterEditor v1.42
- DeeZy v0.1.6
- eac3to v3.47
- libFLAC v1.4.3
- NVEncC v7.41
- qaac v2.81
- vvencFFapp v1.10.0 r209-8fe23c7
- Update AviSynth+ plugins
- SMDegrain v4.5.0d
- xy-VSFilter + XySubFilter v3.2.0.810
- Update Dual plugins
- ffms2 v3.0.1.0 1357+36 r1393 1c0dcfa391 StvG
- L-SMASH-Works v1167 [20240112]
Published by Dendraspis 9 months ago
Special thanks to the few Donators and Contributors who keep StaxRip alive. ❤️
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive:
💡 This release is a regular release again, so I recommend using fresh/new settings, otherwise be careful because of possible side effects.
&color=hsl(110%2C%2060%25%2C%2040%25)&cacheSeconds=110)
Changelog:
- CommandLine: Add new parameter "-SetCrop" to set the crop values, best used with a source file as first parameter
- UI: Fix delay when opening and closing Muxer/Container options window
- UI: Fix Assistant displaying issues
- UI: Fix crash on sources with multiple video tracks on newer versions of eac3to
- UI: Fix Dolby Vision wrong RPU file handling (#1190)
- UI: When a Dolby Vision metadata file is used for "Import VUI metadata", the Crop filter will be applied
- UI: Let "HDR metadata extraction" also set the json file when an rpu file was found/set
- UI: Add option to save Preview window size (#986)
- UI: Improve "Output Highlighting"
- NVEncC: Add --vpp-denoise-dct parameter
- x265: Add Assistant check for VBV settings when using DolbyVision
- Update tools
- chapterEditor v1.42
- DeeZy v0.1.6
- eac3to v3.47
- libFLAC v1.4.3
- NVEncC v7.41
- qaac v2.81
- vvencFFapp v1.10.0 r209-8fe23c7
- Update AviSynth+ plugins
- SMDegrain v4.5.0d
- xy-VSFilter + XySubFilter v3.2.0.810
- Update Dual plugins
- ffms2 v3.0.1.0 1357+36 r1393 1c0dcfa391 StvG
- L-SMASH-Works v1167 [20240112]
Published by Dendraspis 9 months ago
Special thanks to the few Donators and Contributors who keep StaxRip alive. ❤️
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
&color=hsl(110%2C%2060%25%2C%2050%25))
If you want to support StaxRip and keep it alive, please consider donating, which is very appreciated:
⚠️ This release is a bit different: No tools or plugins were added or updated and the StaxRip.exe file is (almost?) 100% compatible with v2.32.x. Therefore this time you can find two archives to download:
-
StaxRip-v2.33.0-x64.7z- In case you don't havev2.32.xor you want to run a clean and complete instance, this is the one to go. -
StaxRip-v2.33.0_ExeOnly.7z- If you already havev2.32.x, you can download this packed exe file only, replace the existing one fromv2.32.xwith this one and you're fine.
&color=hsl(110%2C%2060%25%2C%2050%25)&cacheSeconds=123)
Changelog:
- UI: Audio import via container options reads the track name from the file name (#1184)
- UI: Enhance "HDR metadata extraction"
- UI: Extend two-letter language codes
- UI: Fix crash on "HDR metadata extraction" on some systems
- UI: Fix language recognition of subtitles from paths (#1174)
- UI: Fix ffmpeg not being able to extract "Timed Text" subtitles properly (#1185)
- UI: Improve "Output Highlighting"
- UI: Let ffmpeg Demuxer also extract all subtitles
- UI: Run "Frame Mismatch" only on video files
- UI: Better handling for "Frame Mismatch" errors
Published by Dendraspis 9 months ago
Special thanks to the few Donators who keep StaxRip alive ❤️ and everybody who helped keeping the tools up to date with suggestions, links and more.
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive, please consider donating, which is very appreciated:
&color=hsl(110%2C%2060%25%2C%2050%25)&cacheSeconds=69)
💡 As always: Even tested, please check the outcome of the HDR10+/DolbyVision encodes when using the new features to verify it worked also for your type of source file.
⚠️ Please note, that since v2.29.0 for x265 an AVX2 build is included. If you want a generic build or one, that is even more challenging for your CPU, visit @Patman86 's Releases and simply replace x265.exe or edit the path in StaxRip's App Manager.
- CommandLine: Add new parameter "-ExitWithoutSaving" to exit StaxRip without saving an unsaved project
- Thumbnailer: Fix crash on some video files with higher Bit Depth
- UI: Add HDR metadata extraction to project options
- UI: Add HDR metadata file to encoder settings when using "Import VUI metadata"
- UI: Search for HDR metadata file next to source file and in temp folder to let it import via "Import VUI metadata"
- UI: Add option to show an error message on "Frame Mismatch" after encoding
- UI: Add "DefaultOrFirst" to "Default Subtitles" option
- UI: Add "Close Project" to Main Menu
- UI: Change default option for "Default Subtitles" to "Default"
- UI: Enhance "Output Highlighting"
- UI: Enhance language recognition of subtitles from paths (#1174)
- UI: Fix subtitles not being enabled after import even if set so (#1174)
- UI: Fix UI response delay when opening "Audio Settings" window (#1175)
- UI: Fix demuxing VOBs ignores settings (#577)
- UI: Multiple minor fixes and improvements
- Update tools
- AOMEnc v3.8.0-188-g1cc70eeadf-x64-msvc1937
- DoVi_Tool v2.1.0
- HDR10Plus_Tool v1.6.0
- MKVToolNix v82.0
- MP4Box v2.3-DEV-rev724-g8684dfbcc-x64-msvc1937
- QSVEncC v7.58
- rav1e v0.7.0-(p20240102-2-g7d773ea)-x64-gcc13.2.0
- Subtitle Edit v4.0.3
- SvtAv1EncApp v1.8.0-3+6-0bd9640d-[Mod-by-Patman]-x64-msvc1937
- vvencFFapp v1.10.0 r208-c2ace2a
- x265 v3.5+153+15-813ccbff0-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- QTGMC v3.385s (2023-12-28)
- xy-VSFilter + XySubFilter v3.2.0.809
- Update Dual plugins
- L-SMASH-Works v1164 [20240106]
Published by Dendraspis 10 months ago
🌟 🎆 Happy New Year to all of you! 🚀 ⭐
A rollercoaster year is over, but we managed to publish 17 releases in 2023. A lot of bugs were fixed and new features implemented. And more is going to come in 2024 - starting with this one. 🍾
✨ I wish you only the best for 2024! ✨
Special thanks to the few donators who support StaxRip ❤️ and everybody who helped keeping the tools up to date with suggestions, links and more.
Join our community on Discord for help, talks, information about oncoming releases, polls, etc.
If you want to support StaxRip and keep it alive, please consider donating, which is very appreciated:
&color=hsl(110%2C%2060%25%2C%2050%25)&cacheSeconds=60)
⚠️ Please note, that since v2.29.0 for x265 an AVX2 build is included. If you want a generic build or one, that is even more challenging for your CPU, visit @Patman86 's Releases and simply replace x265.exe or edit the path in StaxRip's App Manager.
- UI: Fix crash on startup on non Vulkan systems (#1158)
- UI: Fix error message on source files with a long file path (#1168)
- UI: Fix recognizing and interpreting source (subtitle) languages (#1120, #1152)
- UI: Fix issues with disappearing Cutting filter and the misleading Assistant message (#1124)
- UI: Fix command line long path issues for qaac (#1166)
- UI: Fix flickering on Video Comparison when window too small to fit all tabs (#1127)
- UI: Shorten long file names in Video Comparison to enhance usability
- UI: Switch languages internally from 2-/3-letter codes to country-language except preferred languages options, not completely yet
- NVEncC: Fix missing Multipass parameter for QBVR mode (#1162)
- NVEncC: Fix minor issues with invisible parameters due to selection order
- NVEncC: Fix incomplete definition of --device parameter
- NVEncC: Fix incomplete definition of --split-enc parameter
- NVEncC: Rename QBVR mode quality setting name (#1162)
- vvencFFapp: Extend "Frames to be encoded" for templates (#1161)
- Update tools
- AOMEnc v3.8.0-178-ge065e0fead-x64-msvc1938
- FFmpeg N-113112-gf5f414d9c4-x64-gcc13.2.0
- MP4Box v2.3-DEV-rev724-g8684dfbcc-x64-msvc1938
- rav1e v0.6.1 (p20231226)-x64-gcc13.2.0
- SvtAv1EncApp v1.8.0-1+3-43997134-[Mod-by-Patman]-x64-msvc1938
- VapourSynth R65
- x264 v0.164.3172+8-d0a13eb-.Mod-by-Patman.-x64-gcc13.2.0
- x265 v3.5+153+14-caf1c2580-.Mod-by-Patman.-x64-avx2-msvc1938
- Update AviSynth+ plugins
- TDeint v1.9
- TIVTC v1.0.28
- Update Dual plugins
- ffms2 v3.0.1.0 1357+34 r1391 4fbfa13 StvG
- L-SMASH-Works v1160 [20231214]
Published by Dendraspis 10 months ago
Special thanks to the few supporters ❤️ and everybody who helped keeping the tools up to date with suggestions, links and more.
⚠️ Please note, that since v2.29.0 for x265 an AVX2 build is included. If you want a generic build or one, that is even more challenging for your CPU, visit @Patman86 's Releases and simply replace x265.exe.
- Log: Fix not showing Media Info of source files in logs (#1114)
- UI: Add Frame Rate Mode information on main window for source files
- UI: Optimize addition of Tonemapping in Crop window
- UI: Fix Video Comparison not being able to open more files when source file is loaded
- UI: Fix progress detections for ffmpeg depending on used codec
- UI: Fix progress detections for opusenc (#1147)
- UI: Fix progress detections for given percentual values (#1143)
- UI: Add Auto-Tonemapping support for Thumbnailer
- UI: Fix ShowMessageBox Icon parameter
- UI: Fix ShowMessageBox call through Command Line leads to an exception message (#1141)
- UI: Add Flip filter profiles
- DeeZy: Fix audio delay handled by encoder and muxer
- FFmpeg: Add hardware AV1 support for AMD/Intel/NVidia (#1145)
- NVEncC: Add --qvbr parameter (#1139)
- NVEncC: Add --output-csp parameter
- NVEncC: Add --disable-nvml parameter
- NVEncC: Add Quiet Log Level
- NVEncC: Fix AV1 CQ parameter values (#1153)
- QSVEncC: Add Quiet Log Level
- QSVEncC: Add --vpp-rff parameter
- QSVEncC: Make --icq mode default encode mode
- rav1e: Fix wrong parameter spelling that crash the encode (#1138)
- SvtAv1EncApp: Add new SSIM tune option (#1118)
- SvtAv1EncApp: Extend --keyint parameter options
- SvtAv1EncApp: Fix --enable-qm parameter definition (#1122)
- SvtAv1EncApp: Fix chunk encoding (#1136)
- VCEEncC: Add AV1 support (#1117)
- VCEEncC: Add --vpp-rff parameter
- VCEEncC: Add --vpp-scaler-sharpness parameter
- VCEEncC: Fix some issues and codec related params
- VCEEncC: Remove --vpp-resize amf_point parameter option
- vvencFFapp: Add new presets
- x265: Fix --log-level param options
- Update tools
- DeeZy v0.1.4
- eac3to v3.36
- FFmpeg N-112998-g1f56bfc986-20231216
- MediaInfo v23.11
- MKVToolNix v81.0
- NVEncC v7.40
- QSVEncC v7.57
- Subtitle Edit v4.0.2
- VCEEncC v8.21
- vvencFFapp v1.10.0
- Update AviSynth+ plugins
- avs_libplacebo v1.5.2
- RemoveDirt v0.9.3
- Update Dual plugins
- L-SMASH-Works v1156 [20231117]
- Update VapourSynth plugins
- None
Published by Dendraspis about 1 year ago
Special thanks to the few supporters ❤️ as well as @Patman86 for providing the latest modified tools and everybody who helped keeping the tools up to date with suggestions, links and more.
⚠️ Please note, that for x265 now an AVX2 build is included. If you want a generic build or one, that is even more challenging for your CPU, visit @Patman86 's Releases and simply replace x265.exe.
- Add header for target file Media Info
- Add new (event) command to open blocking Preview window (#1102)
- Extend title name length for demuxed file names
- Log mismatch between frame count from FrameServer and target file after encode
- UI: Show Changelog at first start
- UI: Add possiblity to dismiss the PNGs saved message in VideoComparison (#1067)
- UI: Add proper identification for HDR tonemapping in Crop window (#1096)
- UI: Add Shortcut for "Save Project As"
- UI: Allow multiple file selection in muxer for audio files
- UI: Apply Crop filter when changing Frameserver
- UI: Change Crop filter addition/setting behaviour
- UI: Enhance Command Line Highlighting
- UI: Enhance Output Highlighting
- UI: Fix broken progress detection for ffmpeg (#1109)
- UI: Fix crash when trying to open the menu in Processing window
- Filters: Fix Vapoursynth filter resamplehq linkage (#1101)
- Filters: Adjust SMDegrain presets
- DeeZy: Fix issue with negative delay
- QSVEncC: Fix bitrate issue in QBVR mode (#1106)
- x265: Minor UI improvements
- x265: Remove deprecated params --hist-threshold and --traditional-scenecut (#1110)
- Update tools
- AOMEnc v3.7.0-363-g02b419c62e-x64-msvc1937
- chapterEditor v1.40
- DeeZy v0.1.1
- FFmpeg N-111918-g0adaa90d89-x64-gcc13.2.0
- libFLAC v1.3.3
- MP4Box v2.3-DEV-rev512-g0cdcdbaaa-x64-msvc1937
- NVEncC v7.31
- Subtitle Edit v4.0
- SvtAv1EncApp v1.7.0-0+13-b922871f-[Mod-by-Patman]-x64-msvc1937
- vvencFFapp v1.9.0 r189-19efe30
- x265 v3.5+147+17-e8947f740-.Mod-by-Patman.-x64-avx2-msvc1937
- Update AviSynth+ plugins
- Descale v2023-04-02 8c53f5d
- JincResize v2.1.2
- vsMSharpen v2.0.1
- Update VapourSynth plugins
- ASTDR v4
- DeCross v1
- Descale v2023-04-02 8c53f5d
- DFTTest2 v6
- insaneAA v0.91
- MotionMask v2
- TemporalSoften2 v1
Published by Dendraspis about 1 year ago
- Add BackgroundColor from VideoComparison to Themes
- Make line numbers added to code lines optional via Settings
- Fix Code Preview not shown in selected windows/app
- Reloading of Preview does not change the window size any more
- DeeZy: Fix output progress detectation (#1092)
- SvtAv1EncApp: Fix --enable-hdr parameter printout
- SvtAv1EncApp: Fix wrong frames value
- VapourSynth: Fix extreme rare bug when opening a source which causes a crash
- vspipe: Fix deprecated parameter call
- Update tools
- MKVToolNix v79.0
- Update VapourSynth plugins
- SubText r4
- VSFilterMod v5.2.7
Published by Dendraspis about 1 year ago
The last release sadly has pathing bug, that needs to be fixed.
⚠️ In case you have StaxRip v2.26.0 already in use, just download StaxRip.exe and delete recovery.srip as well as the subfolder StaxRip_temp from the StaxRip folder and you're up to date. Because nothing was changed setting- and file-wise, the setting files are compatible with v2.26.0. Otherwise proceed as usual.
Changelog:
- Fix grammar (thanks to @LittleVulpix (#1083))
- Fix pathing issue on VapourSynth
- Adjust SMDegrain presets
In case you missed the last release, here are the release notes you should not miss:
I highly recommend reading the Changelog and using fresh/new settings! Especially when you use a shared settings folder, because they will be overwritten!
This time there are no UPX-packed executables included, so there are no false positive AntiVirus warnings any more.
Special thanks to @DJATOM and @jlw4049 for contributing and @pat-e and @Patman86 for helping and testing with the new VapourSynth version. 🤝 🏅
- Remove no-pipe call for x264 using VapourSynth due to incompatibility reasons
- Add .mpeg as supported input file type for DGIndex/D2VWitch
- Add DeeZy and OpusEnc as new audio encoders
- Add new Tonemap presets
- Add option to tonemap videos in Crop window
- Add option to enhance contrast in Crop window for easier cropping
- Add Reload command in Preview
- Add line numbers to Code Preview
- Let Enabling/Disabling a filter in Code Editor make refresh the script for the preview
- Fix shortcut for Preview in Code Editor
- Fix command line parameter issue with quotes
- Improve Output Highlighting a tiny bit
- Check also for negative error codes
- Show warning for Windows 7 users regarding possible incompatibility issues at first start
- Add new macros %audio_bitrate1%, %audio_bitrate2%, %audio_channels1%, %audio_channels2%, %audio_codec1%, %audio_codec2% (#1075)
- Rename macro %delay1% to %audio_delay1% and %delay2% to %audio_delay2%
- Fix "Auto Chroma Subsampling to 4:2:0" for VapourSynth not working on some sources (#1033)
- Fix internally called AutoCrop not adding/enabling Crop-filter (#1075)
- Fix internally called SmartAutoCrop not adding/enabling Crop-filter
- Add more resize defaults (#1079)
- Add possibility to reset window position when holding CTRL+SHIFT while window opens
- Adjust Resize slider minimum/maximum values
- Fix logs from processes being saved into templates (#905)
- SvtAv1EncApp: Fix infinite app calling loop when SvtAv1EncApp encoder profile selected while opening a file (#1068)
- SvtAv1EncApp: Fix wrong multi-pass paremeter combination (#1076)
- SvtAv1EncApp: Add proper 3-pass support
- SvtAv1EncApp: Move Passes option to rate control to keep related settings together
- Update tools
- AOMEnc v3.6.1-1047-gea674a22d0-x64-msvc1937
- DeeZy v0.1.0
- ffmpeg 6.0 N-111762-ga1928dff2c-x64-gcc13.2.0
- libFLAC v1.4.3 (used by eac3to)
- libsndfile v1.2.2 (used by qaac)
- Mp4Box v2.3-DEV-rev478-g892852666-x64-msvc1937
- mpv.net v6.0.4.0
- OpusEnc v1.4.6
- qaac v2.80
- QSVEncC v7.48
- rav1e v0.6.1-(p20230808)-x64-gcc13.2.0
- SvtAv1EncApp v1.6.0-12+12-02ddf03c-[Mod-by-Patman]-x64-msvc1937
- VapourSynth R63
- vvencFFapp v1.9.0
- x264 v0.164.3107+12-d987552-[Mod-by-Patman]-x64-gcc13.2.0
- x265 v3.5+104+20-5f9a54004-[Mod-by-Patman]-x64-msvc1937
- Update AviSynth+ plugins
- AnimeIVTC v2.389 2023-07-20 mod
- BBorders v2023-04-28
- LSFplus v6.0 mix
- NNEDI3CL v1.0.8
- ScenesPack v4.5
- Update Dual plugins
- L-SMASH-Works v1129.0.1.0 20230806
- Update VapourSynth plugins
- AddGrain r10
- Bwdif r4.1
- edi_rpow2 v2021
- EEDI3m r4
- fmtconv r30
- fvsfunc v2022-10-14
- havsfunc r33 [modified by @jlw4049 and @Dendraspis]
- LibDedot v1.0
- LibP2P R2
- libvs_placebo v1.4.4
- mcdegrainsharp v2020-11-03
- MiscFilters R2
- muvsfunc v0.4.0
- mvmulti v2020-14-10
- mvsfunc r10
- nnedi_rpow2 v1.1.0
- NNEDI3CL v8
- Oyster v2021-05-16 [modified by @jlw4049 and @Dendraspis]
- Plum v2021-03-27 [modified by @jlw4049 and @Dendraspis]
- resamplehq v2.1.2
- RemoveGrain r1
- SangNom r42
- TCanny v14
- TimeCube v3.1
- TTempSmooth v4.1
- vcmod 2022-02-10.AC3
- Vine v2020-07-12 [modified by @jlw4049 and @Dendraspis]
- vsTAAmbk v0.8.2
- znedi3 r2.1
- ...and some more existing scripts updated to be compliant with VapourSynth R63
Published by Dendraspis about 1 year ago
I highly recommend reading the Changelog and using fresh/new settings! Especially when you use a shared settings folder, because they will be overwritten!
This time there are no UPX-packed executables included, so there are no false positive AntiVirus warnings any more.
Special thanks to @DJATOM and @jlw4049 for contributing and @pat-e and @Patman86 for helping and testing with the new VapourSynth version. 🤝 🏅
- Remove no-pipe call for x264 using VapourSynth due to incompatibility reasons
- Add .mpeg as supported input file type for DGIndex/D2VWitch
- Add DeeZy and OpusEnc as new audio encoders
- Add new Tonemap presets
- Add option to tonemap videos in Crop window
- Add option to enhance contrast in Crop window for easier cropping
- Add Reload command in Preview
- Add line numbers to Code Preview
- Let Enabling/Disabling a filter in Code Editor make refresh the script for the preview
- Fix shortcut for Preview in Code Editor
- Fix command line parameter issue with quotes
- Improve Output Highlighting a tiny bit
- Check also for negative error codes
- Show warning for Windows 7 users regarding possible incompatibility issues at first start
- Add new macros %audio_bitrate1%, %audio_bitrate2%, %audio_channels1%, %audio_channels2%, %audio_codec1%, %audio_codec2% (#1075)
- Rename macro %delay1% to %audio_delay1% and %delay2% to %audio_delay2%
- Fix "Auto Chroma Subsampling to 4:2:0" for VapourSynth not working on some sources (#1033)
- Fix internally called AutoCrop not adding/enabling Crop-filter (#1075)
- Fix internally called SmartAutoCrop not adding/enabling Crop-filter
- Add more resize defaults (#1079)
- Add possibility to reset window position when holding CTRL+SHIFT while window opens
- Adjust Resize slider minimum/maximum values
- Fix logs from processes being saved into templates (#905)
- SvtAv1EncApp: Fix infinite app calling loop when SvtAv1EncApp encoder profile selected while opening a file (#1068)
- SvtAv1EncApp: Fix wrong multi-pass paremeter combination (#1076)
- SvtAv1EncApp: Add proper 3-pass support
- SvtAv1EncApp: Move Passes option to rate control to keep related settings together
- Update tools
- AOMEnc v3.6.1-1047-gea674a22d0-x64-msvc1937
- DeeZy v0.1.0
- ffmpeg 6.0 N-111762-ga1928dff2c-x64-gcc13.2.0
- libFLAC v1.4.3 (used by eac3to)
- libsndfile v1.2.2 (used by qaac)
- Mp4Box v2.3-DEV-rev478-g892852666-x64-msvc1937
- mpv.net v6.0.4.0
- OpusEnc v1.4.6
- qaac v2.80
- QSVEncC v7.48
- rav1e v0.6.1-(p20230808)-x64-gcc13.2.0
- SvtAv1EncApp v1.6.0-12+12-02ddf03c-[Mod-by-Patman]-x64-msvc1937
- VapourSynth R63
- vvencFFapp v1.9.0
- x264 v0.164.3107+12-d987552-[Mod-by-Patman]-x64-gcc13.2.0
- x265 v3.5+104+20-5f9a54004-[Mod-by-Patman]-x64-msvc1937
- Update AviSynth+ plugins
- AnimeIVTC v2.389 2023-07-20 mod
- BBorders v2023-04-28
- LSFplus v6.0 mix
- NNEDI3CL v1.0.8
- ScenesPack v4.5
- Update Dual plugins
- L-SMASH-Works v1129.0.1.0 20230806
- Update VapourSynth plugins
- AddGrain r10
- Bwdif r4.1
- edi_rpow2 v2021
- EEDI3m r4
- fmtconv r30
- fvsfunc v2022-10-14
- havsfunc r33 [modified by @jlw4049 and @Dendraspis]
- LibDedot v1.0
- LibP2P R2
- libvs_placebo v1.4.4
- mcdegrainsharp v2020-11-03
- MiscFilters R2
- muvsfunc v0.4.0
- mvmulti v2020-14-10
- mvsfunc r10
- nnedi_rpow2 v1.1.0
- NNEDI3CL v8
- Oyster v2021-05-16 [modified by @jlw4049 and @Dendraspis]
- Plum v2021-03-27 [modified by @jlw4049 and @Dendraspis]
- resamplehq v2.1.2
- RemoveGrain r1
- SangNom r42
- TCanny v14
- TimeCube v3.1
- TTempSmooth v4.1
- vcmod 2022-02-10.AC3
- Vine v2020-07-12 [modified by @jlw4049 and @Dendraspis]
- vsTAAmbk v0.8.2
- znedi3 r2.1
- ...and some more existing scripts updated to be compliant with VapourSynth R63
Published by Dendraspis about 1 year ago
Special thanks to @Patman86 for extending SvtAv1EncApp's progress data and withstanding my frequent requests. As well as @darkcity87 and especially @backryun for keeping the tools requests up with suggestions, links and also own builds.
Please consider visiting Contribution / Support to keep StaxRip alive.
- Alter some main menu shortcuts
- Reorganize main menu slightly
- Save settings when selecting new startup template (#1057)
- Add Reload function to Video Comparison
- Add Video Comparison support for AviSynth and VapourSynth scripts (#1055)
- Minor changes to progress detection
- Fix broken progress detection for ffmpeg (#1054)
- Add Commentary flag setting for audio tracks (#959)
- Add Commentary flag setting for subtitle tracks (#959)
- Add Hearing Impaired flag setting for subtitle tracks (#960)
- SvtAv1EncApp: Fix wrong parameter for encoding frames
- SvtAv1EncApp: Add support for modified progress in @Patman86's mod
- Update tools
- SvtAv1EncApp v1.6.0-4+7-0abb2b72-[Mod-by-Patman]-x64-msvc1936
- Update AviSynth+ plugins
- avs_libplacebo v1.3.0
- DPID v1.1.0
- MasksPack v6.7
- Resizers Functions Pack v12.0
- TransformsPack v2.2.0
- Update Dual plugins
- FFTW v3.3.10 (thanks to Nuihc88)
Published by Dendraspis about 1 year ago
Special thanks to @Patman86 for supplying us with fresh built tools as well as @darkcity87 and especially @Backryun for keeping the Tools Request page up with suggestions, links and also own builds.
- AVS: Fix InterFrame not working with SVPFlow (#1046)
- AOMEnc: Fix not saved target bitrate for CQ rate mode (#1052)
- SvtAv1EncApp: Fix deprecated URLs
- SvtAv1EncApp: Fix output path with spaces causing error (#1045)
- SvtAv1EncApp: Move Passes to Basic category
- SvtAv1EncApp: Add --progress parameter
- SvtAv1EncApp: Fix encoding output and crash for "--progress 2" (#1045)
- Update tools
- chapterEditor v1.39
- MP4Box v2.3-DEV-rev472-g2a2327c3b
- vvencFFapp v1.9.0
- Update AviSynth+ plugins
- edi_rpow2 v1.0 mod 87
- Update Dual plugins
- FFTW v3.3.10
&color=hsl(110%2C%2060%25%2C%2050%25))
&color=hsl(110%2C%2060%25%2C%2050%25))
&color=hsl(110%2C%2060%25%2C%2050%25))
&color=hsl(110%2C%2060%25%2C%2050%25))
&color=hsl(210%2C%2060%25%2C%2050%25)){kind=icon}
&color=hsl(210%2C%2060%25%2C%2050%25)){kind=icon}
&color=hsl(210%2C%2060%25%2C%2050%25)){kind=icon}