gloo

Fixes

• Support Knative Ingress' TLS configuration to support default keys for ServerCertificate and PrivateKey (https://github.com/solo-io/gloo/issues/1040)

Fixes

• Make the gateway proxy service selectors more specific. (https://github.com/solo-io/gloo/issues/1029)

Dependency Bumps

• solo-io/solo-kit has been upgraded to v0.10.10.

New Features

• Enable per-route CORS policy specification. (https://github.com/solo-io/gloo/issues/1020)
• Use fine grained RBAC permissions for each component (https://github.com/solo-io/gloo/issues/250)
• Allow Gloo gateway to be configured with sidecar containers via a provided helm helper (https://github.com/solo-io/gloo/issues/871)

Fixes

• Make eds ignore upstreams in non watched namespaces (https://github.com/solo-io/gloo/pull/1034)
• Knative install creates settings (https://github.com/solo-io/gloo/issues/1023)

Fixes

• Fix default address being configured on knative lb status (https://github.com/solo-io/gloo/issues/1017)
• Ensure Knative CRDs are installed and registered before applying manifests in knative install. (https://github.com/solo-io/gloo/issues/996)
• Update envoy to 1.11.1 (https://github.com/solo-io/gloo/pull/1028)

This release contained no user-facing changes.

Dependency Bumps

• solo-io/solo-kit has been upgraded to v0.10.9.
• solo-io/go-utils has been upgraded to v0.9.17.

New Features

• Allow Gloo to run as default Ingress, without requiring ingress class annotation (https://github.com/solo-io/gloo/issues/507)
• Knative Install defaults to knative-serving 0.8.0 (https://github.com/solo-io/gloo/issues/1006)
• Allow virtual service with different domains to share the same certificate (https://github.com/solo-io/gloo/pull/1004)
• Allow using roles with gloo instead of cluster roles. This makes single namespace install more isolated. (https://github.com/solo-io/gloo/issues/751)

Fixes

• Ensure each crd is registered during install steps (https://github.com/solo-io/gloo/issues/996)

Fixes

• Fix value merging and copy paste errors in global image prefix. (https://github.com/solo-io/gloo/issues/988)

Dependency Bumps

• knative.dev/serving has been upgraded to v0.8.0.

New Features

• Knative Install deploys public and private proxy (https://github.com/solo-io/gloo/issues/980)
• Allow configuring the QPS and burst settings for kube clients (https://github.com/solo-io/gloo/pull/970)

Fixes

• Knative routes fixed for presence of multiple knative ingress (https://github.com/solo-io/gloo/issues/979)
• fix typo in ingress proxy deployment (https://github.com/solo-io/gloo/issues/986)
• fix typo in values-ingress template (https://github.com/solo-io/gloo/issues/987)

New Features

• Support global image variables in helm chart (https://github.com/solo-io/gloo/issues/892)

Fixes

• Knative Ingress Status is now updated whenever generation changes (https://github.com/solo-io/gloo/issues/971)

Fixes

• Fix ec2 bug where it only listed public ips (https://github.com/solo-io/gloo/pull/968)

New Features

• Support Knative Namespace-Scoped Ingress (https://github.com/solo-io/gloo/issues/937)
• Allow using the release namespace as the namespace for both reading and writing (https://github.com/solo-io/gloo/issues/949)

Fixes

• Remove pre-install hook from settings resource in helm chart. (https://github.com/solo-io/gloo/issues/956)
• Apply namespace exclusively in pre-install. (https://github.com/solo-io/gloo/issues/957)

New Features

• Add Header Manipulation Features Plugin (https://github.com/solo-io/gloo/issues/936)
• Add Host Rewrite Plugin (https://github.com/solo-io/gloo/issues/936)

Dependency Bumps

• solo-io/solo-kit has been upgraded to v0.10.7.

New Features

• Expose Envoy's traffic shadowing capabilities. (https://github.com/solo-io/gloo/issues/934)
• Add command for getting xds snapshot (https://github.com/solo-io/gloo/issues/938)

Fixes

• Use IfNotPresent image pull policy for release images, and Always for dev images. (https://github.com/solo-io/gloo/issues/942)
• Clean up output logic and formatting for glooctl get and dry-run. (https://github.com/solo-io/gloo/issues/904)

New Features

• Introduce probs again, but set them to off by default. (https://github.com/solo-io/gloo/issues/924)

Fixes

• Set all kube2e tests to use the same lock to avoid overwriting CRDs (https://github.com/solo-io/gloo/issues/912)
• Disable liveness and readiness temporarily to bring the proxy back into a good state. (https://github.com/solo-io/gloo/issues/924)
• Fix VS edit cli command so it no longer always writes an empty sslConfig causing the VS to break. (https://github.com/solo-io/gloo/issues/921)

New Features

• Enable function discovery for consul upstreams (https://github.com/solo-io/gloo/issues/913)
• Enable upstream discovery for consul upstreams (https://github.com/solo-io/gloo/issues/914)

Fixes

• Enable uds to run without crashing when kubernetes is not reachable (https://github.com/solo-io/gloo/issues/905)
• Sanitize Consul EDS names (https://github.com/solo-io/gloo/issues/906)
• Make Liveness probe work in read only file systems. (https://github.com/solo-io/gloo/issues/917)

New Features

• Enable route-specific tracing config. (https://github.com/solo-io/gloo/issues/880)
• Support unix socket upstreams (https://github.com/solo-io/gloo/issues/871)

In Gloo 0.18.1, we added support for TCP proxying, which required a breaking change to the gateway API.
Please check out https://gloo.solo.io/upgrading/0.18.1/ for details on how to seamlessly upgrade Gloo,
automatically convert existing configuration, and migrate traffic while avoiding downtime.

New Features

• Add access logging capability to gloo. (https://github.com/solo-io/gloo/issues/814)
• Add glooctl support for creating and deleting upstream groups (https://github.com/solo-io/gloo/issues/649)
• Allow setting resource limits in the helm chart. (https://github.com/solo-io/gloo/pull/889)

This is a pre-release. Please don't deploy this, instead use 0.18.1.

In Gloo 0.18.1, we added support for TCP proxying, which required a breaking change to the gateway API.
Please check out https://gloo.solo.io/upgrading/0.18.1/ for details on how to seamlessly upgrade Gloo,
automatically convert existing configuration, and migrate traffic while avoiding downtime.

Breaking Changes

• update the gateway API in preparation for TCP proxy (https://github.com/solo-io/gloo/issues/778)
• update the gateway to have multiple types to support tcp proxy (https://github.com/solo-io/gloo/issues/778)
• Settings CRD has been refactored to reflect Consul changes. (https://github.com/solo-io/gloo/issues/883)

New Features

• add ability to print basic non-kube yaml with cli commands (https://github.com/solo-io/gloo/issues/896)
• Add liveness and readiness probes (https://github.com/solo-io/gloo/issues/872)
• Fix race condition where helm chart sometimes wouldn't publish on release builds. (https://github.com/solo-io/gloo/issues/778)
• Add support for tolerations to gateway-proxy (https://github.com/solo-io/gloo/issues/877)
• Enable tracing. (https://github.com/solo-io/gloo/issues/879)
• Enable running Gloo using Vault as a Secret backend and Consul as a configuration Backend. (https://github.com/solo-io/gloo/issues/883)

Fixes

• glooctl interactive prompts display updated state (https://github.com/solo-io/gloo/issues/551)
• Make liveness work even when there is no gloo config. (https://github.com/solo-io/gloo/issues/872)
• Fix an unlikely edge case where a client might emit an incomplete list of upstreams. (https://github.com/solo-io/gloo/pull/886)
• fix issue with partial EDS where clusters were out of sync with endpoints (https://github.com/solo-io/gloo/issues/899)