pysma

What's Changed

• Fix pre-commit hook by @frimtec in https://github.com/kellerza/pysma/pull/118
• Add operating_status (#124) by @qqwa in https://github.com/kellerza/pysma/pull/125

New Contributors

• @qqwa made their first contribution in https://github.com/kellerza/pysma/pull/125

Full Changelog: https://github.com/kellerza/pysma/compare/0.7.4...0.7.5

What's Changed

• Support other language than english by @frimtec in https://github.com/kellerza/pysma/pull/117

New Contributors

• @frimtec made their first contribution in https://github.com/kellerza/pysma/pull/117

Full Changelog: https://github.com/kellerza/pysma/compare/0.7.3...0.7.4

What's Changed

• Fix for SB1.5 format by @rklomp in https://github.com/kellerza/pysma/pull/115

Full Changelog: https://github.com/kellerza/pysma/compare/0.7.2...0.7.3

What's Changed

• Disable new pv_power by default by @rklomp in https://github.com/kellerza/pysma/pull/113
• Set default unit to None by @rklomp in https://github.com/kellerza/pysma/pull/114

Full Changelog: https://github.com/kellerza/pysma/compare/0.7.1...0.7.2

What's Changed

• Add pv_power - 6100_0046C200 by @phdelodder in https://github.com/kellerza/pysma/pull/112

New Contributors

• @phdelodder made their first contribution in https://github.com/kellerza/pysma/pull/112

Full Changelog: https://github.com/kellerza/pysma/compare/0.7.0...0.7.1

What's Changed

• Pytest configuration by @rklomp in https://github.com/kellerza/pysma/pull/108
• Dynamic sensors by @rklomp and @FindusK in https://github.com/kellerza/pysma/pull/109
  • Sensors are now dynamically created based on the sensors the device is providing. In existing configuration this could cause extra sensors to be created or some sensors that never worked to be removed.

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.12...0.7.0

What's Changed

• Add 404 error log message by @rklomp in https://github.com/kellerza/pysma/pull/102
• Add definitions for the Secure Power Supply by @jordancarlson08 in https://github.com/kellerza/pysma/pull/103
• Add pv_isolation_resistance by @rklomp in https://github.com/kellerza/pysma/pull/106

New Contributors

• @jordancarlson08 made their first contribution in https://github.com/kellerza/pysma/pull/103

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.11...0.6.12

What's Changed

• Handle TimeoutError by @kellerza in https://github.com/kellerza/pysma/pull/98
• Update pre commit versions by @rklomp in https://github.com/kellerza/pysma/pull/99

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.10...0.6.11

What's Changed

• Simplify example by @rklomp in https://github.com/kellerza/pysma/pull/92
• Set res to 0 only if unit is "W" by @rklomp in https://github.com/kellerza/pysma/pull/94

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.9...0.6.10

What's Changed

• Set value None to 0 if we have a path by @rklomp in https://github.com/kellerza/pysma/pull/89
• Reverted changes for 0.6.8

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.8...0.6.9

What's Changed

• Add sensor entity_category by @rklomp in https://github.com/kellerza/pysma/pull/87
• Add url property by @rklomp in https://github.com/kellerza/pysma/pull/88

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.7...0.6.8

What's Changed

• docs(README): point SBFspot link at "new" GitHub site by @muggenhor in https://github.com/kellerza/pysma/pull/86
• Fix get_devclass if no class present in result by @rklomp in https://github.com/kellerza/pysma/pull/85

New Contributors

• @muggenhor made their first contribution in https://github.com/kellerza/pysma/pull/86

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.6...0.6.7

What's Changed

• fix unit for temperature sensors by @popoviciri in https://github.com/kellerza/pysma/pull/84

New Contributors

• @popoviciri made their first contribution in https://github.com/kellerza/pysma/pull/84

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.5...0.6.6

What's Changed

• Update sensor definitions by @rklomp in https://github.com/kellerza/pysma/pull/82

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.4...0.6.5

What's Changed

• Always send a payload by @rklomp in https://github.com/kellerza/pysma/pull/81

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.3...0.6.4

What's Changed

• Fixes #79 - Add support for 3 input inverters by @scotte in https://github.com/kellerza/pysma/pull/80

New Contributors

• @scotte made their first contribution in https://github.com/kellerza/pysma/pull/80

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.2...0.6.3

This release will disable 40 of the sensor definitions by default to save resources in Home Assistant.

What's Changed

• Disable sensors by default by @rklomp in https://github.com/kellerza/pysma/pull/78

Full Changelog: https://github.com/kellerza/pysma/compare/0.6.1...0.6.2

• Improved request logic to prevent errors in home assistant on an occasional ServerDisconnectedError (5e96a9c37b84ad64be2e5a4439b881f6010ac234)

Breaking changes

• Add exceptions and restructure _fetch_json (#68)
• Refactored read_logger (#70)
• Make SMA attributes private (#76)

Other Changes

• Add missing assert in test (#67)
• Add type annotations (#69)
• Implement sphinx docs using google-style docstring (#71, #73)
• Increase coverage to 100% (#74)
• Make sure l10n is availble when not authenticated (#75)

• Support Device Classes (#57)
• Implement device sensor map (#61)
  • Adds support for Energy Meter and Battery devices
  • Sensors object parameters have been changed.
  • Removed sensors current_consumption and total_consumption (home-assistant/core#49727)
• Reduce loglevel for notfound sensors (45cd922bf19adba9bb37a33c3082681a59b67b22)
• Add software version to device_info (#66)