SolaX Power Modbus custom_component for Home Assistant (Supports some Ginlong Solis, Growatt, Sofar Solar, TIGO TSI & Qcells Q.Volt Hyb)
Bot releases are visible (Hide)
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Beta 56 Changes:
Sofar Old:
Beta 57 Changes:
Sofar Old:
Beta 58 Changes:
Sofar Old:
SolaX:
Added:
Renamed:
Beta 59 Changes:
Sofar Old:
SolaX:
Added:
Beta 60 Changes:
Sofar Old:
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Beta 56 Changes:
Sofar Old:
Beta 57 Changes:
Sofar Old:
Beta 58 Changes:
Sofar Old:
SolaX:
Added:
Renamed:
Beta 59 Changes:
Sofar Old:
SolaX:
Added:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Beta 56 Changes:
Sofar Old:
Beta 57 Changes:
Sofar Old:
Beta 58 Changes:
Sofar Old:
SolaX:
Added:
Renamed:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Beta 56 Changes:
Sofar Old:
Beta 57 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Beta 56 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Beta 55 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Beta 54 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Beta 53 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Beta 52 Changes:
Sofar Old:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 49 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 50 Changes:
Solis:
Corrected:
Beta 51 Changes:
Solis:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 48 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Beta 49 Changes:
Solis:
Corrected:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Beta 48 Changes:
Solis:
Corrected "Energy Storage Control Switch" register
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Beta 48 Changes:
Solis:
Reverted "House Load Total" scaling
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Beta 47 Changes:
Solis:
Added the missing sensor part to
Fixed scaling of:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Beta 46 Changes:
Solis:
Introduced
Fixed readings of:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Beta 45 Changes:
Sofar:
SolaX Gen4:
Resolves #215
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Beta 44 Changes:
Solis:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Beta 43 Changes:
Sofar:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Beta 42 Changes:
Sofar:
Solis:
SolaX:
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3
Published by wills106 almost 2 years ago
Initial test to confirm new sensor formatting it correct.
If you try this version, please take a screenshot before and after to confirm if the sensors are still correct including the scaling.
Also report back on any debug info in the Log.
Beta 2 Changes:
Enhance debugging code
Corrected duplicate GEN2 registers.
Beta 3 Changes:
Moved to plugin_ for Inverter's
(Only SolaX working at the moment)
Beta 4 Changes:
Added plugin_ for Inverter's to config flow
Minor changes to SolaX registers in plugin_solax
Beta 5 Changes:
Correct Sofar duplicate registers.
Beta 6 Changes:
Improved plugin loading
Updated Sofar Hybrid registers
Added older Sofar PV, AC & Hybrid Registers
Beta 7 Changes:
Corrected native_unit_of_measurement
Beta 9 Changes:
Scaling fix for Gen4 Inverters
Extra debugging for plugin_
Re-added MIC / MIC Pro
Beta 10 Changes:
Reworked Sofar sensors.
Beta 11 Changes:
Update selection options to Support HA 2022.11 https://github.com/wills106/homeassistant-solax-modbus/issues/140
Pin pymodbus>=2.5.3", "pymodbus<=3.0.1 Hopefully resolve https://github.com/wills106/homeassistant-solax-modbus/issues/154
Further work on Sofar registers.
Beta 12 Changes:
Removed old 0.6.x code for reading Modbus registers.
Changes to Sofar scaling
Beta 13 Changes:
Code Cleanup.
Beta 14 Changes:
Gen3:
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/174
Adjusted minimum value of number.solax_battery_minimum_capacity_grid_tied
Beta 15 Changes:
Added Solis Hybrid Registers (xxx-5G)
Beta 16 Changes:
Corrected manifest.json preventing Integration from showing in Integration Page.
Beta 17 Changes:
Enhanced fault handling for easier debugging.
Beta 18 Changes:
Split X3 MIC Register blocks.
Additional registers for Solis Inverters, added timed charge / discharge.
Beta 19 Changes:
Enhanced fault handling for easier debugging.
Beta 20 Changes:
Additional fault handling for easier debugging.
Beta 21 Changes:
Split SolaX X3 MIC Registers into smaller blocks.
Moved Solax X3 MIC Inverted serial numbers into MIC Serial Number decoding.
Disabled by default following SolaX Gen4 "Selfuse Backup SOC", potentially not fully Implemented correctly on all Gen4 Inverters.
Beta 22 Changes:
Corrected SolaX MIC Blocks,
Corrected SolaX MIC "PV Power 3" register.
Beta 23 Changes:
Changed X3 MIC 'invertertype' so it won't read 3rd PV String
Added X3 MIC Pro 'invertertype' definition in case we find one with 3rd PV String.
Beta 24 Changes:
Ignore 9 out of 10 polling cycles when Modbus down - Reduces slowdown.
Reduced amount of logging info, moved to debug info only.
Beta 25 Changes:
Added Solis RHI-3P10K-HVES-5G
Fixes https://github.com/wills106/homeassistant-solax-modbus/issues/190
Beta 26 Changes:
Added missing allowedtypes - Sofar & Solis
Beta 27 Changes:
Updated plugin_solis_old.py with RHI-3P10K-HVES-5G & RHI-6K-48ES-5G Serial Number to test which version of the Modbus docs they are using.
Beta 28 Changes:
Updated plugin_solis_old.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 29 Changes:
Updated plugin_solis.py with Solis RHI-3.6K-48ES-5G Serial Number
Beta 30 Changes:
Removed RTC from plugin_solis.py
Beta 31 Changes:
Corrected "Meter Voltage" plugins_solis.py
Beta 32 Changes:
Relaxed Solis Serial Number detection to all slight difference in Inverters to work.
Additional sensors & number entities plugin_solis.py
Beta 33 Changes:
Corrected Number Entities in plugins_solis.py
Additional entities in plugins_solis.py
Beta 34 Changes:
Added missing POWER_VOLT_AMPERE_REACTIVE in const.py
Beta 35 Changes:
Corrected "Meter Current" & "Meter Voltage" plugin_solis.py
Beta 36 Changes:
plugin_solis.py
Made "Battery Charge Today" & "Battery Discharge Today" Energy Dashboard compatible
Adjust scaling "House Load Today", "House Load Total" & "House Load Yesterday"
Beta 37 Changes:
plugin_solis.py
Added serial starting 1031 such as 3104 Model Inverters.
Beta 38 Changes:
Solis:
Corrected native_unit_of_measurement - "ActivePower"
General Cleanup
Solax:
Re Enabled "Measure Power" which restored functionality of grid_export, grid_import & house_load
Fixed https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 39 Changes:
All:
Added ParallelMode config option
General Code cleanup
Sofar
Added minimal ParallelMode for Master Inverter
SolaX
Added ParallelMode for Master Inverter
Solis:
Renamed RST to L1, L2 & L3
Corrected incorrect kWh to kW
Coming Soon:
SolaX
Renaming RST to L1, L2 & L3
Closes https://github.com/wills106/homeassistant-solax-modbus/issues/190, Closes https://github.com/wills106/homeassistant-solax-modbus/issues/198
Beta 40 Changes:
Corrected X3 MIC / MIC Pro Gen1 vs Gen2
Beta 41 Changes:
Corrected plugin_solis.py Serial Number check.
Coming Soon:
SolaX
- Renaming RST to L1, L2 & L3