homeassistant-solax-modbus

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

0.5.12 fixes 0.5.11a which didn't fix 0.5.11

Moral of the Story, don't try and update code without version control in place!

Sorry for any inconvenience caused.

0.5.11a - Fixes 0.5.11

Gen3 - XRE:
Fixed: Unknown Sensors https://github.com/wills106/homeassistant-solax-modbus/issues/90

Ge2, Gen3, Gen4:
Fixed: sensor.solax_rtc https://github.com/wills106/homeassistant-solax-modbus/issues/91

Gen3 - XRE:
Fixed: Unknown Sensors #90

Ge2, Gen3, Gen4:
Fixed: sensor.solax_rtc #91

Gen3 - XRE:
Fixed: Unknown Sensors

Gen2:
Fixed: Unknown Sensors

Gen3:
Changed:

• sensor.solax_e_charge_today
  scaling fix

• sensor.solax_run_mode
  new run mode "Standby"

Beta fix for 0.5.9a
As 0.5.9 broke Gen2

Gen2, Gen3 & Gen4:
Fixed:

https://github.com/wills106/homeassistant-solax-modbus/issues/84 SolaX Modbus is using deprecated NumberEntity features which will be unsupported from Home Assistant Core 2022.10, please report it to the custom component author.
Gen2 & Gen3:
Changed:

number.solax_battery_minimum_capacity min_value to 10
Gen3:
Fixed:

sensor.solax_battery_install_capacity
sensor.solax_inverter_model_number

Gen2, Gen3 & Gen4:
Fixed:

• #84 SolaX Modbus is using deprecated NumberEntity features which will be unsupported from Home Assistant Core 2022.10, please report it to the custom component author.

Gen2 & Gen3:
Changed:

• number.solax_battery_minimum_capacity min_value to 10

Gen3:
Fixed:

• sensor.solax_battery_install_capacity
• sensor.solax_inverter_model_number

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Test for Serial Detection.

DO NOT USE ON NON MIC INVERTER

Preliminary support for X3 Mic, with Serial starting "MU80"
Might still fail Serial check, as serial possibly at 0x300

Correct:

• Gen4 Feedin and Backup min_soc controls

Add support for:

• Gen4 3.7kW

Preliminary support for 3kW & 3.7kW Gen2 X1 Inverters (SK-TL & SK-SU)

Added support for an Alternative Gen3 X1 Hybrid with Serial Numbers starting "HCC"

Added preliminary support for the X1 Boost Gen3 Solar PV only Inverter.

Simplified serial numbering to support wider range of Gen3 X1 Inverters.

Should support more 3kW, 3.6kW, 3.7kW & 4.6kW models by default.