portentax8-stm32h7-fw | Arduino Ecosystem Directory

Bot releases are hidden (Show)

portentax8-stm32h7-fw - 0.0.3 Latest Release

Published by aentinger 12 months ago

What's Changed

Bugfix: Cleanly transfer interrupts from the H7 to the M8 by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/1
Fix: STM32H747 only supports detection of rising edges, falling edges or rising/falling as interrupt source. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/2
Fix: unload_modules.sh was broken due to location change of the x8h7 kernel module by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/4
Fix: only transmit CAN frame on valid opcode AND always send a status message upon attempted CAN transmit by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/5
Clean-up CAN driver by inlining trivial functions. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/6
Fix: format has type int, required printf-specified %d. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/7
Fix: erroneous DLC set when transmitting more than 8 bytes. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/8
Cleanup: remove dead/out-commented CAN code. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/9
Fix: type, product is called Portenta X8 (not M8). by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/10
Fix: replace simple algorithm for determining CAN bitrate configuration with more robust one by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/11
Fix: an extended CAN ID can in fact have a value below 0x7FF. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/12
Fix: correctly pass-through received frames with both standard and extended CAN id by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/13
Cleanup: remove clutter-up of comments that no one needs. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/14
Fix: get rid of "can_reset" and "can_mode". by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/15
Removed unused elements index/hz from structure can_t. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/16
Fix: removed unused enum CanMode and CanType. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/17
[CI] - add GitHub action for building the firmware. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/18
[CI] add dependabot to keep CI actions up-to-date. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/19
[CI] add sync labels workflow in order to have the same labels across all of Arduino's repos. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/20
[CI] add spell-check action for checking spelling, grammar, etc. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/21
Draft: store build artefacts in build folder. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/22
Delete no-longer required stored artefact "SPI_attach.log". by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/23
Remove make file targets related to flashing via stm32flash/dfu-util: by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/24
Fix sporadic CI build failure, resulting from "builddir" not being created on time. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/25
Fix: remove superfluous struct "can_t" since it only has one member left. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/26
Fix: align function naming style and file name for CAN. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/27
Fix CAN filtering: extended CAN IDs can smaller than 0x800 and still be an extended CAN ID by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/28
Fix: only transport relevant CAN frame payload via IMX8 / H7 brigde. by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/29
Fix: various race conditions and packet transmission bugs (and allow multi sub-packets per meta-packet) by @aentinger in https://github.com/arduino/portentax8-stm32h7-fw/pull/30