🗲FLASH WITH A BROWSER🗲

Manual:

Up to date manual available in a Wiki section.

Changes:

• Added bands switching to FM broadcast radio function. in FM radio mode press F + 1 BAND or long press 1 BAND. These bands are available in BK1080, and not defined by me. The main benefit is that you can set the band that is used in your country and auto scan function won't scan outside of it.
• Fixed continuous frequency tuning while using long press UP/DOWN in monitoring mode.
• Some other smaller bug fixes

🗲FLASH WITH A BROWSER🗲

⭐ Dedicated CHIRP driver available at uvk5-chirp-driver

Manual:

Up to date manual available in a Wiki section.

Changes:

• Frequency range scanning in spectrum.
  • Setup frequency range (manual)
  • Turn on spectrum analyzer
  • NOTE: in range scanning frequency blacklisting is limited to 15 frequencies
• Additional frequency steps: 9kHz, 20kHz, 200kHz
• Optimized fixed backlighting of backlight settings
• Fixed backlight timeout doubled
• Fixed battery indicator always showing 4 bars

🗲FLASH WITH A BROWSER🗲

Manual:

Up to date manual available in a Wiki section.

Changes:

• Minor fix with S0, S9 settings in EEPROM. There were instances (#252) where there was some garbage data written in that part of the memory, S0 was read as 1 and it led to S-meter not working properly. This is an attempt to eliminate such problems. If your S-meter works correctly you can skip this update, there is nothing else here.

🗲FLASH WITH A BROWSER🗲

Manual:

Up to date manual available in a Wiki section.

Changes:

• AM-fix improvement, so it doesn't get stuck on strong signals like a plane flying over head
• AM-fix in spectrum analyzer
• Improved AGC settings for AM reception. AGC on AM is used when AM-fix is disabled in the menu, or not included in build options. AGC mode is inferior compared to AM-fix but it still should be usable.
• Frequency rounding to half of a step, this allows to enter frequencies with half channel offsets, e.g. PMR frequencies using 12.5kHz step.
• S-meter S-values user configurable. It can be changed with a CHIRP driver that is being developed (very crude implementation right now).
• FM radio mode indicator that I removed some time ago was brought back
• bug fixes (#167, #166, #170, #179, #197, #206)

🗲FLASH WITH A BROWSER🗲

Manual:

Up to date manual available in a Wiki section.

Changes:

• Scan frequency range function
  • switch to frequency mode
  • set upper and lower VFO frequencies to scan range boundaries
  • long-press 5 NOAA, ScnRng label should show up
  • start scan with long-press * Scan
  • it will scan between given boundaries
  • long-press 5 NOAA or EXIT, or switch VFOs to exit ScnRng mode
• Adjusted s-meter values according to measurements from #53 (thanks to g4eml)
• Use aviation channels to frequency conversion scheme for 8.33 step frequency rounding (thanks to g4eml)
• FM radio buttons functions changed to be the same as in VFO mode
  • long-press support
  • 2 VFO/MR switches channel/frequency mode
  • long-press * Scan starts auto scan
  • short-press * Scan starts manual scan

🗲FLASH WITH A BROWSER🗲

Manual:

Up to date manual available in a Wiki section.

Changes:

• Adjusted DTMF tones
• 1750 tone volume increased
• Lowered s-meter values
• Fix monitor mode interrupted by PTT and turned back on with any VFO change
• Long press EXIT turns off monitor mode

🗲FLASH WITH A BROWSER🗲

Changes:

• Improved DCS/CTCSS scanning in a menu RxDCS and RxCTCS (not well known function, enter the menu and press * SCAN)
• Fixed Apollo Quindar PTT ID option. The microphone was muted when that option was active.
• Fixed mic bar displaying over low battery popup
• Mic bar changed to the same style as s-meter
• Fixed shifted audio frequency for DTMF codes 1, 3, A
• TxEnab hidden menu removed. Added new option in hidden menu F Lock, DISABLE ALL with the same functionality. If you used TxEnab you will have to set up the new option.
• TX on all bands (Wiki)

🗲FLASH WITH A BROWSER🗲

Changes:

• SSB demodulation mode added (menu DEMODU)
• New function for programmable buttons to switch demodulator modes (SWITCH DEMODUL)
• More frequency steps (only available in the radio, not available in CHIRP)
• Use the custom battery percentage calculations for battery icon and low battery beeping
• Modified levels for battery icon (3 below 88%, 2 below 65%, 1 below 41%, 0 below %17, blinking below 5%)
• Low battery popup, stops annoying beeping when confirmed
• Fix s-meter over S9 values calculation
• Spectrum analyzer RSSI trigger limited to screen boundaries

🗲FLASH WITH A BROWSER🗲

Changes:

• Fixed STE not working when TX CTCSS/DCS is off
• Fixed DTMF calling, radio was receiving transmissions without active call
• Second discharge curve for 2200mAh battery percentage calculation. You have to change battery type in the hidden menu BatTyp. 1600mAh has very different curve, this was causing wrong indications when 2200mAh battery was used.

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1
ENABLE_REDUCE_LOW_MID_TX_POWER:= 0

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• Fix a buzzing on RX after reboot bug introduced in the recent release

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• Fixed offset input menu not working properly
• New configurable button function: VFO/MR
• Changed airband upper limit from 136MHz to 137MHz
• MENU button now saves frequency/channel scan result (same as PTT, EXIT still discards the search and goes back to initial channel/frequency)
• Scanner now remembers last found frequency/channel and goes to it when scan result is accepted (PTT or MENU as stated above)
• piotr022 style S-meter
• Backlight intensity setting, menu BLMin, BLMax. BLMax is what ON was before, BLMin is what OFF was.
• Imported 1o11's small changes to AM fix and RF gains settings.

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• fixed STE not working, revert to standard squelch tail (ENABLE_CTCSS_TAIL_PHASE_SHIFT = 0)
• fixed another bug in RSSI calibration
• display and allow input of >1GHz frequencies (press band switch on F6 band or manually input all 9 to get into the 1GHz range, the input box switches modes and allows input of an extra digit)
• reduce EEPROM wear by not overwriting unchanged data
• extra side-key functions: key lock, switch VFOs
• copy channel to frequency mode changed from long press MENU button to 1 BAND function button
• added menu configurable long-press function for MENU button (menu: M Long)

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 0
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• Fixed copy channel to VFO function acting on the opposite VFO
• Fixed channel scanning on the opposite VFO
• Fixed restoring channel number/frequency on scan exit
• Added side buttons function configuration menu
• Menu items reordered, channel and radio settings separated, less important setting more in the middle, similar functions closer to each other, Reset moved to the hidden menu.

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• T VFO and DUALRX consolidated into one RXMODE. The functionality is exactly the same, but representation is more clear I think.
  • MAIN ONLY - Tx and Rx on the selected upper or lower frequency, no dual watch
  • DUAL RX RESPOND - monitors both frequencies, if transmission is received on secondary frequency it becomes a Tx frequency for a couple of seconds so you can respond to a call
  • CROSS BAND - primary frequency always for Tx, secondary always for Rx
  • MAIN TX DUAL RX - Tx always on primary frequency, monitors both frequencies for Rx
• SOS added as a 3rd function of the flashlight
• Modified menu labels, lower case, some names changed
• Fixed RSSI EEPROM calibration reading
• Fixed some small bugs

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• Fixed unable to lock/unlock keys when FM radio is active
• Fixed permanent TX when PTT pressed while scanning
• Fixed power save never activated

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 0
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)

https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• Fixed random upper/lower VFO used for TX, when dual watch is switched on
• Fixed battery symbol always with 4 bars bug
• Don't update battery state (don't show voltage/percentage drop) when TX, like it used to be.
• Fixed the DTMF input box bug

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)

https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• merged new 1o11 changes
  • Dual watch doesn't have to be turned off for copy channel to VFO (long press M key)
  • Squelch tuning
  • Remember scan ALL channels option across power cycles
  • Fast frequency mode scanning
• Turned on the "squelch more sensitive" build option
• Fixed shifted key numbers in frequency input box in spectrum analyzer

Build options:

ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/5397b3ee88b1c63b85207f5d0f1f8c3e48c2c758
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

🗲FLASH WITH A BROWSER🗲

Changes:

• merged new 1o11 changes
  • Copy channel to VFO (long press M key, dual watch has to be turned off)
  • Compander bug fixed
  • Battery calibration updated (go to the BATCAL in the menu and confirm the setting to recalculate battery icon levels)
  • Scanlist toggle switch (long press Scan button while scanning channels)

Build options:

ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 1
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/a6324ffcf8f68d47e6bae3e83b73c436699f34ea
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

❗❗❗USE k5prog-win FOR UPLOADING❗❗❗
The original Portable Radio Updater incorrectly reports oversized file

Changes:

• fixed communication error (CHIRP/CPS error)

Build options:

ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_ALARM := 1
ENABLE_TX1750 := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_COMPANDER := 1
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/f8aaf47374a3572e7f4da6f2bd249e2547949649
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936

❗❗❗USE k5prog-win FOR UPLOADING❗❗❗
The original Portable Radio Updater incorrectly reports oversized file

Changes:

• merged new 1o11 changes
  • New BLT RX menu option (backlight on RX)
• Split key 5 function: long press - toggle scan list assignment, F+5 - spectrum analyzer

Build options:

ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_ALARM := 1
ENABLE_TX1750 := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_COMPANDER := 1
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_SPECTRUM := 1

Note:

This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.

Sources versions:

https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/f8aaf47374a3572e7f4da6f2bd249e2547949649
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936