Neopixel protocol decoder for Saleae Logic Analyzer

Decode the 800 kHz protocol used in Neopixel (WS2812) LEDs with a Saleae-brand logic analyzer.

Provides bytes above the bit data stream.

Installation

1. Install the Saleae Protocol Analyzer SDK
2. In the SDK folder, git clone this repo
3. Follow the instructions in the SDK documentation folder to build and
   use the protocol analyzer

Next steps

1. Provide test data for use in developing the protocol decoder as recommended in the Saleae documentation.
2. Group the bytes into 24-bit groups and show the actual LED color!
3. Provide releases pre-built for the major OSes.

License

Copyright 2016 Julien Vanier. Released under the MIT license.