G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)
AGPL-3.0 License
Bot releases are visible (Hide)
Published by SoftFever almost 2 years ago
Changes:
Support device control view for 3rd party printers
Youtube video:
Port Small perimeters
feature from PrusaSlicer. I also add an extra option to adjust the small perimeter threshold
You might want to reduce speed for small perimeter parts to prevent failures like bellow:
Add fan speed preview mode
Fix an issue that print time estimation is inaccurate when Klipper
g-code style is used.
Published by SoftFever almost 2 years ago
This release enhances support for 3rd party printers.
Change notes:
Published by SoftFever almost 2 years ago
Change notes will be updated later
Published by SoftFever about 2 years ago
Label objects to support Klipper Exclude Objects feature
Allow users to change output file name format
Fix a bug that pressure advance
value was not saved in the profile
Optimize non-Bambu printer profiles
Remove M900 S0
which is not necessary.
Published by SoftFever about 2 years ago
Published by SoftFever about 2 years ago
Allow users to adjust accelerations for inner/outer walls separately.
Allow users to adjust the bottom surface flow-rate
Fix an issue that bed temperature for other layers is not set properly. This bug exists in the upstream as well. My PR here(https://github.com/bambulab/BambuStudio/pull/319)
Published by SoftFever about 2 years ago
Based on BambuStudio v1.2.0.9(https://github.com/bambulab/BambuStudio/releases/tag/v1.2.0.9)
Published by SoftFever about 2 years ago
This build is based on Bambulab's V1.1.1.1 release.
A modified version of Bambu Studio.
It has following changes:
Setup connection
Send to print
Demo video: https://youtu.be/vSNE9iGj2II
[gcode_arcs]
resolution: 0.1
[gcode_macro M205]
gcode:
{% set x_jerk = params.X|default(5)|float %}
{% set y_jerk = params.Y|default(5)|float %}
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={x_jerk}
It's also recommended to add the following dummy macros to make Klipper happy
# Make BambuStudio happy
[gcode_macro G17]
gcode:
[gcode_macro M981]
gcode:
[gcode_macro M1003]
gcode:
Image credits:
Published by SoftFever about 2 years ago
Sync up with BambuStudio 1.1.1.1
If you have trouble running this app, please try installing the following dependencies:
https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe
https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/vcredist2019_x64.exe
Published by SoftFever about 2 years ago
Sync up with official v1.1.0.14 build.
Published by SoftFever over 2 years ago
Fix a minor issue found in BambuStudio V1.0.10 - SoftFever 2
: not able to switch languages.
You can download this build if you want to use languages other than English.
Published by SoftFever over 2 years ago
Change notes:
BambuStudio-SoftFever
so that it can co-exist with the official buildNOTE: If you can't run the build or experience blank wizard UI issues, pls install vcredist2019_x64.exe
and MicrosoftEdgeWebView2RuntimeInstallerX64.exe
first.
You can find the simple introduction video here: https://youtu.be/zCc7mVwu2xQ
Published by SoftFever over 2 years ago
A modified version of Bambu Studio.
I has following changes:
Published by SoftFever over 2 years ago
BambuStudio 01.00.10.05 Windows build