Bot releases are hidden (Show)
Published by xcguang over 4 years ago
Published by xcguang over 4 years ago
Published by xcguang over 4 years ago
Published by xcguang over 5 years ago
Published by wujiangang about 6 years ago
1024+1024 flash map
is supported by default. Therefore, please choose 16Mbit/32Mbit-C1 flash size
when flashing these AT bin files with Espressif's Flash Download Tools.documents/CN/Partition Table 说明.md
or documents/EN/Partition Table.md
.
system_partition_table_regist
system_partition_get_ota_partition_size
system_partition_get_item
wifi_set_sleep_level
wifi_get_sleep_level
wifi_set_listen_interval
wifi_get_listen_interval
wifi_enable_signaling_measurement
wifi_disable_signaling_measurement
AT+SYSMSG_DEF
and AT+SYSMSG_CUR
to instead of AT+SYSMSG
.AT+CIPCLOSEMODE
to select TCP close mode.AT+CWJAP_CUR
and AT+CWJAP_DEF
to disable the connection to open/wep routerAT+CIPRECVLEN
to get the length of received data in passive receiving mode.AT+CIPRECVMODE
to set TCP receive mode.AT+CIPSSLCCONF?
AT+CIPSSLCCONF=<ssl_mode>
AT+RFAUTOTRACE
command.os_printf_plus
in interrupt handler.wifi_station_scan
.Published by wujiangang over 6 years ago
Published by wujiangang over 6 years ago
bool spi_flash_erase_protect_enable(void)
;bool spi_flash_erase_protect_disable(void)
;-DUSE_OPTIMIZE_PRINTF
in third_party/Makefile;-ffunction-sectons -fdata-sections
;
time()
function from libmain;ets_delay_us
declaration;os_calloc
declaration;LWIP_NETIF_TX_SINGLE_PBUF
enabled;already freed
and exception when esp8266 acts as SSL/TLS server;Update AT version to 1.6.0.0;
Add a new command AT+SYSMSG
to enable some report information;
Add a new command AT+CWCOUNTRY
;
AT+CWCOUNTRY=<country_policy>,"country_code",<start_channel>,<total_channel_number>
Add new command AT+CIPSERVERMAXCONN
;
AT+CIPSERVERMAXCONN=<num>
Update command AT+CWLAP
;
AT+CWLAP =<ssid>[,<mac>,<ch>,<scan_type>,<scan_time_min>,<scan_time_max>]
Update command AT+CWLAPOPT
;
Optimize tcp server by using new espconn_recv
;
Fix an issue that getting error irom string when print messages after upgrade;
Fix an issue that baudrate is not correctly set when it was set at 1,200;
Fix an issue that it should return error if the link id is wrong;
Fix an issue that DNS auto mode is used by default;
Fix a wrong link id issue when client connection number reaches maximum;
Fix an issue that error will be reported when the maximun connection number is more than 5;
Fix the message is incorrect when creating UDP if ip is a domain name;
Fix GSLP too long time error;
Fix that AT+CIPSTART
causes busy if the server is connected at the same time;
int wifi_station_set_enterprise_identity(u8* identity, int len)
;void wifi_station_clear_enterprise_identity(void)
;system_timer_reinit
;Published by wujiangang over 7 years ago
uart_div_modify
, which can support a 32-bit DivLatchValue in the SDK instead of the ROM one, and also remove uart_div_modify
from the ld file;void user_spi_flash_dio_to_qio_pre_init(void)
. If the dio to qio flash mode is not used, users can add an empty user_spi_flash_dio_to_qio_pre_init
on the application side to reduce iRAM usage;system_phy_freq_trace_enable
in user_rf_pre_init
to enable it;Published by wujiangang over 7 years ago