A HomeBridge plugin to expose Connector Motor Hub blinds, shades, curtains and similar devices to Homekit
APACHE-2.0 License
This plugin exposes blinds, shades, curtains and similar devices managed by a Connector Motor Hub DD7002B/DD1554 or compatible bridge - as well as standalone Wifi motors such as the DT72TE, DT72TV, DM35F and DM45E series - as Homekit accessories. These are typically manufactured by Dooya and sold under various brand names. If your devices are controlled by the Connector+ app (iOS/Android) or one of the branded apps from the manufacturers listed below, this plugin will make them available in Homekit.
In addition to the Dooya devices mentioned above, the plugin is also expected to work with devices sold by the following vendors, which use the same network protocol:
The following hubs/bridges are also expected to work with this plugin:
Note that the blinds/curtains/etc must already have been paired with the app in order for them to be visible to this plugin.
In the plugin configuration, fill in the App Key
field. The key can be obtained using the Connector+ app:
For branded apps, the key can be obtained using similar approaches:
version
field (iOS) or to the right of the photo placeholder (Android).This is the only mandatory configuration required by the plugin. The plugin will attempt to automatically find your devices via UDP multicast. If this does not work, you can use the Connector Hub / Wifi Device IPs
section to manually point the plugin to your hub and/or standalone devices.
Thanks to @alexbacchin for putting together a repo full of documentation about the Connector hub network protocol. I had almost given up on finding a way to make my blinds visible to Homekit until I stumbled across it 😃