Home Assistant integration for the Telekom Glasfaser-Modem 2
MIT License
Home Assistant community integration to integrate with the Telekom Glasfaser-Modem 2.
Name | Description |
---|---|
Restart | Restarts the modem |
For this integration to work, the modem must be accessible from the Home Assistant host. This requires special NAT rules to be configured on the router, which is unfortunately not possible with most home routers. (Advanced routers such as OPNsense, pfSense or similar are required for this)
You can use this link to check whether your modem can be reached (if you are using the default IP address): http://192.168.100.1/ONT/client/html/content/overview/status.html
If the modem is not reachable, you cannot use this integration!
Click here:
OR
Add https://github.com/Netzwerkfehler/hass-GFM2
as a custom repository in HACS.
then
configuration.yaml
).custom_components
directory (folder) there, you need to create it.custom_components
directory (folder) create a new folder called gfm2
.custom_components/gfm2/
directory (folder) in this repository.Only the IP address of the modem is required as a configuration parameter in this integration. It is preset to "192.168.100.1" and does not normally need to be changed.
This integration queries these endpoints:
Method | Endpoint |
---|---|
GET | /ONT/client/data/Status.json |
GET | /ONT/client/data/FirmwareUpdate.json |
GET | /ONT/client/data/Reboot.json |
POST | /ONT/client/data/Reboot.json |