Get the measures from your NetAtmo thermostat and send it to your MQTT broker
GPL-3.0 License
Statistics for this project are still being loaded, please check back later.
Connect RaspberryPi GPIOs and 1-Wire temperature sensors to MQTT
Http temperature sensor for Homebridge: https://github.com/homebridge/homebridge
MQTT client controlling SwitchBot button automators & curtain motors, compatible with Home Assist...
Get values from sensors in your i2c bus and send it to your MQTT broker
buderus2mqtt is a gateway between a KM200 Buderus internet gateway and MQTT with the https://gith...
Transfer linux system state to mqtt and optionally to home assistant
MQTT client reporting measurements of FT017TH wireless thermo/hygrometers, compatible with Home A...
Simple generic MQTT Prometheus exporter for IoT working out of the box
Transfer systemctl state to mqtt and optionally to home assistant
Send payload from mqtt message to firebase realtime database
Forward a MQTT message from a topic to another topic
Temperature and humidity monitor
MQTT interface for Energenie ENER314-RT add-on board for the Raspberry Pi, designed for use by Ho...
Send sensor data from an ESP + BNO055 → MQTT and/or serial port
Send data from Hoymiles PV plant to Home Assistant without cloud