RP2040 PIO-based PDM input to I2S output example
APACHE-2.0 License
Raspberry Pi Pico (RP2040) PIO-based PDM input to I2S output example.
cargo run --release
詳しくは .cargo/config.toml のrunnerを確認してください。 probe-runを用いて書き込みます。
Minimal example project for using TinyUSB with Pico-PIO-USB on a Raspberry Pi Pico
An Easy-to-Use RPI Pico PIO Emulator
Polyphonic Digitally Controlled Oscillator (DCO) controlled by Raspberry Pi Pico PIO
(Unfinished) Hardware YM2151 VGM Player using RP2040
My projects with RP2040 Raspberry Pi Pico and Pico W
A software UART implementation for the RP2040 using PIO.
Build support for embedded Rust: Cargo integration with other embedded build ecosystems & tools, ...
Raspberry Pi: development platform for PlatformIO
Read input from a USB keyboard through the Raspberry Pi Pico PIO interface
High-speed Adalight USB serial LED driver implementation for Raspberry Pi Pico RP2040. Support fo...
HUB75 driver for RP2040. Uses PIO and DMA to achieve high refresh rate and high color depth with ...
An implementation using PICOs programmable input/output block (PIO) to connect to SN74HC595 8-bi...
A PIO driver for DHT sensor
L2 R2 S4: RaspberryPi 133MHz Cortex-M0 Dual Core MCU (RP2040)
Firmware for a low cost .WAV-file player