rsync-by-config

A config-file-based wrapper around rsync

GPL-3.0 License

Stars
8
View Code on GitHub View on X
Ecosystems: Python

Rsync By Config

I'm unable to remember the rsync options I usually need for transferring files to a remote location. Also, I'm too lazy to memorize the remote path. And of course I have a lot of different remotes with different directories. So I made a wrapper around rsync which reads from a config file in the current directory.

Rsync By Config was previously called Simpler Rsync.

Getting Started

You can install Rsync By Config either with pip install or manually. Using pip is the recommended way (but it is not really tested beyond my OS X setups).

With pip

This all-important one-liner should take care of pretty much everything:

pip install https://github.com/AndiH/rsync-by-config/archive/master.zip

You should have a command rbc now available in your shell. In the process, all dependencies should be installed as well.

Test it with

rbc --help

More manually but having the same effect, you could clone into some temporary directory and call pip into that directory:

cd $TMPDIR
git clone https://github.com/AndiH/rsync-by-config
cd rsync-by-config
pip install .
rbc --help

Without pip 

cd ~/bin/
git clone https://github.com/AndiH/rsync-by-config
ln -s rsync-by-config/rbc.py
rbc.py --help

You should insert ~/bin/ into your $PATH, e.g. via export PATH=$HOME/bin/:$PATH so you can use rbc.py globally from any folder. If rbc.py does not run, make sure to have installed all dependencies. Note: For the time being, a message about this being not the ideal way to invoke rbc is printed. This will go away at some point.

Options

rbc reads from a configuration file in the current directory, i.e. .sync.toml. Depending on the parameters specified there, the content of a directory (e.g. the current one) is copied to a target location using rsync.

The Python script has a few command line options, all documented via rbc --help:

  • ENTRY: The name of the entry in the config file to be used for synchronization. If not specified, the default entry is taken. If there's no default, the first entry is taken. Maybe, at least, since the read-in of the config file is not strongly controlled New in 3.0: Synchronize with multiple entries at the same time by specifying entry,anotherentry (comma-separated, no space)!
  • --monitor: Run Rsync By Config in monitoring (or deamon) mode. This will monitor the source folder for changes and issue a synchronization if one occurs. The package Watchdog is used for this. (A more manual alternative to Watchdog is the command line utility fswatch, which can invoke arbitrary programs when a folder is changed.)
  • --confg_file=somefile: Specify a different config file. The default is .sync.toml.
  • --dryrun: Calls rsync with --dryrun, preventing all actual copies. Good for testing.
  • --verbose: Output every step and test of the script.
  • --listhosts: Lists the hosts specified in the config file. Exits afterwards. Adding --verbose will list all options of the hosts specified in the config file.
  • --rsync_options="--something": Propagate --something to rsync as an additional option. Can be invoked multiple times. Shorthand: -o. The rsync option is given in addition to the basic, default options hardcoded into the script file and in addition to the options defined in the config file.

To specify values for the options globally, environment values can be set. This is handy if you don't like my choice of calling the default config file .sync.toml (see below) and want to change it. The command line options (at least the last three from the list above) are accessible as environment variables with a RBC_ prefix, thanks to Click. So, for example, to rename the default config file, do:

export RBC_CONFIG_FILE=.my.toml
rbc somehost

Config File

The config file used for Rsync By Config is written in TOML. One entry in the config file is for one distinct parameter configuration, i.e. usually for one remote location. The config file is structured as follows.

[firsthost]
    hostname = "first"
    target_folder = "/something/"
    rsync_options = ["--delete", "-v"]

[secondhost]
    hostname = "127.0.0.1"
    target_folder = "/something/"
    default = true

The available keys are:

  • hostname: A hostname to be understood by rsync. Hint: Use aliases in your ~/.ssh/config/!
  • target_folder: The target directory to be syncing to (remote or local).
  • rsync_options: An array of strings of rsync options. They are used in addition to the default, basic options hardcoded into the Python program and the options supplied by the command line call.
  • source_folder: Usually, Rsync By Config is expected to work from the current directory of invocation. Setting this value changes this behavior explicitly. Useful in combination with gather, see next section.

Note: remote_folder and local_folder are deprecated and will be removed soon! There's a handy little command in the warning to convert config files.

Additionally to the parameters of an entry, global parameters for all entries in the config file can be specified. The parameters need to be specified before the first entry occurs. Currently, a global rsync_options and the selection of a default entry are supported. The default entry is chosen if no entry is selected dedicatedly via the command line. Example:

rsync_options = ['-v']
default = "firsthost"

[firsthost]
    hostname = "first"
    # etc

Inverse Transfers (Gathering)

Rsync By Config also supports transfers from a remote host to the local machine (a gathering operation). An entry in the config file as an example looks like this:

[inversehost]
    hostname = "second"
    source_folder = "/some/target/"
    target_folder = "/some/source/"
    gather = true
    rsync_options = ["--update"]

The gather option is the important one. It switches the order of source and destination in the underlying rsync call.

Note: Due to the implementation, gather only switches the order of source and destination in the very last step. A result: source_folder becomes the target of the rsync transfer, and target_folder the actual source. If this bothers you, let me know.

Local Transfers

For copying on the same machine, Rsync By Config supports host-less operations between a source directory and a target directory. This mode is enabled if the hostname key of the respective entry in the config file is missing. In this case, the script also checks for target_folder to be a valid directory on the current machine. Example config file:

[localstuff]
    target_folder = "/dev/null/"

Dependencies

Some Python packages are required for Rsync By Config. All can be installed with pip:

pip install sh toml click watchdog

While non-essential for its core task, Watchdog is needed for the monitoring capabilities. The dependency is optional, though.

When choosing the recommended way of installation via pip all dependencies are installed in the process.