Personal Hackintosh (OpenCore) configuration for Gigabyte Z390 Aorus Pro WiFi, Intel Core i7-9700K & Intel UHD Graphics 630
Personal Hackintosh (OpenCore) configuration for Gigabyte Z390 Aorus Pro WiFi, Intel Core i7-9700K and Intel UHD Graphics 630
This is my personal configuration and I made it publicly available for educational and inspirational purposes only. Please learn how to configure and install OpenCore using the OpenCore Install Guide.
I'm not responsible for any damage nor will I give support.
Note: Don't use or trust any OpenCore files (drivers, kexts, etc.) that are not from the official sources. Always gather/compile them yourself.
Only essential features are listed below and may be incomplete, but updated/fixed if necessary.
config.plist
Values that are {{REPLACE_ME}}
must be replaced with actual values.
DeviceProperties/Add/PciRoot(0x0)/Pci(0x2,0x0)
07009B3E
for AAPL,ig-platform-id
isn't working (anymore) for Intel UHD 630 and will result in a black screen.
00009B3E
.AAPL,ig-platform-id
, framebuffer-patch-enable
and framebuffer-stolenmem
aren't sufficient and will result in a black screen after the OpenCore boot sequence.
04
to get a video signal (Note: AAPL,ig-platform-id
must be set to a working value beforehand).# Get Volume UUID
$ diskutil info /Volumes/<volume_name> | grep 'Volume UUID'
# Edit `/etc/fstab` with `vifs` and add Volume UUID to disable auto-mount
$ sudo vifs
# Add new line on bottom
UUID=<volume_uuid> none ntfs ro,noauto