Inject Colorful lighting into your ZimaCube!
CubeFX is a third-party open-source lighting control system designed for the ZimaCube, based on the ESP32-C3 and WS2812B LED strips. It allows you to customize lighting effects, colors, and speed, and control them through a web page or buttons.
CubeFX_ota_xxx.bin
firmware from the Releases pageZimaCube
AP, the default password is homecloud
.bin
file to the ESP32-C3 development boardConnect to the AP and open http://172.16.1.1/post
[!TIP]
It is recommended to use a cell phone to connect as close as possible to the 7th-Bay, because its signal is really weak.
If you just can't connect, you can also press BOOT key to "touch the blind box" and get a random set of effects.
Or use other program to POST data to http://172.16.1.1/post
in the following format:
{
"on": 1,
"id": 5,
"speed": 128,
"lightness": 255,
"data": [
{
"h": 0,
"s": 100,
"v": 100
},
{
"r": 0,
"g": 255,
"b": 0
},
"0000FF"
]
}
Enjoyed the project? Consider buying me a coffee - it helps me keep going!