Simple Skinnable, 3D Printed SplitFlap Display Module, permit to display large numbers, connecting the modules to each other
Patrice Freydiere - Avril/Septembre 2019
This repository contains the technical elements to create a flip flap display module, This display can be used for a physical web counter, a clock, letter display.
Parametric design permit to use other elements to display (picto, drawing).
The FlipFlap module aim to reduce the number of part to build it. Modules are connected to each others and contribute to display large messages. The module is only responsible to manage the mechanics and contribution intelligence.
Using standard PVC card helps have nice diplay digits, they are easy to setup as there are printers allowing to create the fonts.
Using SCAD as modeler permit to have adaptative design, and change the dimensions.
Four Spaces Modules:
Exploded view of one module : (4 main printed parts + cards)
This project is used for side projects. All comments, improvements are welcome.
The 3D design aim to be printed, with a minimum parts number.
for more informations, go to doc/ folder on how to print and build
3D Design
integrating the upstream serial and downstream serial, works both.
Fix a pin placement issue
This project is inspired from Dead_simple_split_flap_display_ 's work
And splitflap work (upon the buiding simplification)