Bot releases are hidden (Show)
Published by hydra over 7 years ago
Cleanflight v2.0.3
Latest Cleanflight Configurator >= v2.0.0 is required.
Changes since v2.0.2:
Changes since v2.0.1:
Changes since v2.0.0:
Features:
Notes:
Known Issues:
SAFETY:
OSD Slave usage:
User Support / Questions / Help:
Bug Reports ONLY:
Thanks:
All configurator versions are available here:
https://github.com/cleanflight/cleanflight-configurator/releases
Published by hydra over 7 years ago
Cleanflight v2.0.2
Latest Cleanflight Configurator >= v2.0.0 is required.
Changes since v2.0.1:
Changes since v2.0.0:
Features:
Notes:
Known Issues:
SAFETY:
OSD Slave usage:
User Support / Questions / Help:
Bug Reports ONLY:
Thanks:
All configurator versions are available here:
https://github.com/cleanflight/cleanflight-configurator/releases
Published by hydra over 7 years ago
Cleanflight v2.0.1
Latest Cleanflight Configurator v2.0.0 is required.
Changes since v2.0.0:
Features:
Notes:
SAFETY:
Known Issues:
OSD Slave usage:
User Support / Questions / Help:
Bug Reports ONLY:
Thanks:
All configurator versions are available here:
https://github.com/cleanflight/cleanflight-configurator/releases
Published by hydra over 7 years ago
Cleanflight v2.0.0
Latest Cleanflight Configurator v2.0.0 is required.
Features:
Notes:
SAFETY:
Known Issues:
OSD Slave usage:
User Support / Questions / Help:
Bug Reports ONLY:
Thanks:
All configurator versions are available here:
https://github.com/cleanflight/cleanflight-configurator/releases
Published by hydra over 7 years ago
Cleanflight v2.0.0-RC2
Cleanflight 2.x is now based on the Betaflight v3.1 code, it's currently identical except for the version name and msp flight controller identifier.
Use this development configurator:
https://github.com/cleanflight/cleanflight-configurator/archive/update-for-api-1.33.0.zip
Install development configurator using instructions here:
https://github.com/cleanflight/cleanflight-configurator#installation
Report configurator issues as comments here:
https://github.com/cleanflight/cleanflight-configurator/pull/450
Report firmware issue as comments here:
https://github.com/cleanflight/cleanflight/issues/2696
Features:
Known Issues:
User Support / Questions / Help:
Bug Reports ONLY:
Published by hydra over 7 years ago
Cleanflight v2.0.0-RC1
Cleanflight 2.x is now based on the Betaflight v3.1 code, it's currently identical except for the version name and msp flight controller identifier.
This release is the first Cleanflight v2.x release candidate, with support for a limited selection of targets during this transition period.
IMPORTANT Requires configurator v2.0.0 - download it here: https://github.com/cleanflight/cleanflight-configurator
Published by hydra almost 8 years ago
Cleanflight v1.14.2
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
NAZE
Changes since v1.14.0:
Changes since v1.14.1:
Published by hydra almost 8 years ago
Cleanflight v1.14.2
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
NAZE
Changes since v1.14.0:
Changes since v1.14.1:
Published by hydra almost 8 years ago
Cleanflight v1.14.2
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
NAZE
Changes since v1.14.0:
Changes since v1.14.1:
Published by hydra almost 8 years ago
Cleanflight v1.14.1
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
NAZE
Changes since v1.14.0:
Published by hydra almost 8 years ago
Cleanflight v1.14.0
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
NAZE
Published by hydra almost 8 years ago
Cleanflight v1.14.0-Release Candidate 2 (RC2)
There are new defaults that improve flight performance, suggest flashing with 'FULL CHIP ERASE' selected and selectively restoring your settings so that you get the best performance possible.
Cleanflight now supports OSD hardware and OSD configuration via the cleanflight configurator.
Read more about this here: https://github.com/cleanflight/cleanflight/issues/2210
IMPORTANT:
OSD-USERS:
FC Changes:
FC/OSD changes:
OSD Changes
Published by hydra about 8 years ago
v1.14.0-Release Candidate 1 (RC1) is the first release of Cleanflight v1.14.0.
This release candidate is aimed at users of the SPRacingF3OSD board only, binaries for other boards will be available when RC2 is released.
IMPORTANT:
Known issues:
Published by hydra over 8 years ago
Thanks to anyone who's ever helped out a fellow cleanflight user - without you all the developers would be stuck answering questions instead of coding - keep up the good work!
There have been MASSIVE amounts of code cleanups in this release, we really put the clean in cleanflight with this release.
There are now over 1000 forks of cleanflight on Github, amazing! - If you're a developer and have forked cleanflight you will really want to incorporate the changes into your codebase ASAP!
NOTE: Upgrading from < v1.13.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
Changes from v1.12.1
Changes from v1.13.0-RC1
Changes from v1.13.0-RC2
Full change log: https://github.com/cleanflight/cleanflight/compare/v1.12.0...v1.13.0
NOTE: some SPRacingF3EVO boards shipped with firmware 1.12.0 which was labelled 1.13.0. You can use the date, api version shown when connecting to the board and the cli status
command to distinguish between them. If in doubt reflash it.
NOTE: BlHeli 4w support requires latest BlHeliSuite.
NOTE: PID LUX_FLOAT has had its settings scaled to the same values as MWREWRITE so that users can change between LUX_FLOAT and MWREWRITE without changing their PID values.
NOTE: CC3D PPM has been moved from pin 3 to pin 8.
NOTE: Your aircraft won't arm if the processor is overloaded. This normally only effects F1 boards (e.g. Naze, Flip and CC3D). If there is a problem with arming with one of these boards users should switch to the MWREWRITE
PID or choose other features and settings to reduce CPU load.
Many thanks to @ledvinap @martinbudden for their really hard work on this release! Thanks also to all testers and everyone else contributing code, bug reports, suggestions, fixes and other feedback. Only together can we make it AWESOME!
Published by hydra over 8 years ago
Thanks to anyone who's ever helped out a fellow cleanflight user - without you all the developers would be stuck answering questions instead of coding - keep up the good work!
There have been MASSIVE amounts of code cleanups in this release, we really put the clean in cleanflight with this release.
There are now over 1000 forks of cleanflight on Github, amazing! - If you're a developer and have forked cleanflight you will really want to incorporate the changes into your codebase ASAP!
NOTE: Upgrading from < v1.13.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
Changes from v1.12.1
Changes from v1.13.0-RC1
Full change log: https://github.com/cleanflight/cleanflight/compare/v1.12.0...v1.13.0-RC1
NOTE: some SPRacingF3EVO boards shipped with firmware 1.12.0 which was labelled 1.13.0. You can use the date, api version shown when connecting to the board and the cli status
command to distinguish between them. If in doubt reflash it.
NOTE: BlHeli 4w support requires latest BlHeliSuite.
NOTE: PID LUX_FLOAT has had its settings scaled to the same values as MWREWRITE so that users can change between LUX_FLOAT and MWREWRITE without changing their PID values.
NOTE: CC3D PPM has been moved from pin 3 to pin 8.
NOTE: Your aircraft won't arm if the processor is overloaded. This normally only effects F1 boards (e.g. Naze, Flip and CC3D). If there is a problem with arming with one of these boards users should switch to the MWREWRITE
PID or choose other features and settings to reduce CPU load.
Many thanks to @ledvinap @martinbudden for their really hard work on this release! Thanks also to all testers and everyone else contributing code, bug reports, suggestions, fixes and other feedback. Only together can we make it AWESOME!
Published by hydra over 8 years ago
Thanks to anyone who's ever helped out a fellow cleanflight user - without you all the developers would be stuck answering questions instead of coding - keep up the good work!
There have been MASSIVE amounts of code cleanups in this release, we really put the clean in cleanflight with this release.
There are now over 1000 forks of cleanflight on Github, amazing! - If you're a developer and have forked cleanflight you will really want to incorporate the changes into your codebase ASAP!
NOTE: Upgrading from < v1.13.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
Changes from v1.12.1
Full change log: https://github.com/cleanflight/cleanflight/compare/v1.12.0...v1.13.0-RC1
NOTE: some SPRacingF3EVO boards shipped with firmware 1.12.0 which was labelled 1.13.0. You can use the date, api version shown when connecting to the board and the cli status
command to distinguish between them. If in doubt reflash it.
NOTE: BlHeli 4w support requires latest BlHeliSuite.
Many thanks to @ledvinap @martinbudden for their really hard work on this release! Thanks also to all testers and everyone else contributing code, bug reports, suggestions, fixes and other feedback. Only together can we make it AWESOME!
Published by hydra over 8 years ago
IMPORTANT: ** Requires >= v1.1.0 configurator **
NOTE: Upgrading from < v1.12.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
REMINDER: Some CLI get/set commands have changed. some variables are now set using OFF/ON instead of 0/1.
Changes between v1.12.1 and v1.12.0
Note: some SPRacingF3EVO boards shipped with this firmware equivalent to this but with in incorrect version number of 1.13.0 instead of 1.12.1 and without the important fix for the MPU9250 mag driver.
Changes from v1.12.0
KNOWN ISSUES:
Special mention to key contributors: DigitalEntity, BorisB, Ledvinap, ProDrone, Stronnag and MartinBudden. Thanks guys - your continued work keeps making everything better!
Thanks again to the awesome Cleanflight developer and user communities for their continued hard work, support and feedback.
Published by hydra over 8 years ago
IMPORTANT: ** Requires >= v1.1.0 configurator **
NOTE: Upgrading from < v1.12.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
REMINDER: Some CLI get/set commands have changed. some variables are now set using OFF/ON instead of 0/1.
KNOWN ISSUES:
Special mention to key contributors: DigitalEntity, BorisB, Ledvinap, ProDrone, Stronnag and MartinBudden. Thanks guys - your continued work keeps making everything better!
Thanks again to the awesome Cleanflight developer and user communities for their continued hard work, support and feedback.
Published by hydra over 8 years ago
IMPORTANT: ** Requires >= v1.1.0 configurator **
NOTE: Upgrading from < v1.12.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
IMPORTANT: Due to some new default settings you should retune your PIDs.
REMINDER: Some CLI get/set commands have changed. some variables are now set using OFF/ON instead of 0/1.
KNOWN ISSUES:
Special mention to key contributors: DigitalEntity, BorisB, Ledvinap, ProDrone, Stronnag and MartinBudden. Thanks guys - your continued work keeps making everything better!
Thanks again to the awesome Cleanflight developer and user community for their continued hard work, support and feedback.
Published by hydra almost 9 years ago
IMPORTANT: ** Requires >= v1.1.0 configurator **
NOTE: Upgrading from < v1.12.0 will erase your configuration, backup via GUI and CLI before flashing.
NOTE: Some defaults have changed. Do NOT blindly restore your backups using the CLI.
REMINDER: Some CLI get/set commands have changed. some variables are now set using OFF/ON instead of 0/1.
set gyro_sync=ON
cli command to enable) for better flight performancegyro_soft_lpf
and gyro_lpf
cli settings).Special mention to key contributors: DigitalEntity, BorisB, Ledvinap, ProDrone, Stronnag and MartinBudden. Thanks guys - your continued work keeps making everything better!
Thanks again to the awesome Cleanflight developer and user community for their continued hard work, support and feedback.