16 channel BMS with 18-bit flying ADC, active and passive balancing
GPL-3.0 License
Use openinverter hardware as an island (non-grid connected) inverter
This is to connect a LED-Lamp (with up to 16 channels and 4096 steps resolution per channel) to ...
Main firmware of the Huebner inverter project
Repurposes the openinverter main board as a buck or boost mode charger
Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART...
ESP32 based CO2 monitor using a SenseAir S8 sensor. Some additional features like graphs, touch s...
This is an ESP32 port of the popular Chorus RF Laptimer
A guide for setting up flashing your ESP projects directly from your browser
CMake build system( framework) with kconfig support for C/CPP projects
Replacing JDY-08 BLE 4.0 firmware with the HM-10 v540
Empty Openinverter project to start your own
Code & schematics for position tracking sensor using HTC Vive's Lighthouse system and a Teensy bo...