Main firmware of the Huebner inverter project
GPL-3.0 License
Alternative firmware for ESP32 based Feizer PTS200 soldering iron. Full asynchronous non-blocking...
Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
Empty Openinverter project to start your own
Haptic input knob with software-defined endstops and virtual detents
Use openinverter hardware as an island (non-grid connected) inverter
ESPHome component to monitor and control a JN-MPPT or JN-W/S Controller via RS485
This is to connect a LED-Lamp (with up to 16 channels and 4096 steps resolution per channel) to ...
Repurposes the openinverter main board as a buck or boost mode charger
16 channel BMS with 18-bit flying ADC, active and passive balancing
Amateur Wireless Rotor Controller
This is an ESP32 port of the popular Chorus RF Laptimer